PURPOSE This study aimed to discover a way to increase the bond strength between bis-acryl resins, using a comparison of the shear bond strengths attained from bis-acryl resins treated with light curing, pressure, oxygen inhibition, and heat. MATERIALS AND METHODS Self-cured bis-acryl resin was used as both a base material and as a repair material. Seventy specimens were distributed into seve...

Abstract: The purpose of this study is to produce scarf joint through explosive welding process (EXW). The scarf weld is a process in which the final bond interface is oblique. With applying the explosive welding technique, this joint can create a metallic bond between similar or dissimilar metals. In this study, chamfered end of aluminum and copper plates were joined explosively and named scar...

We review recent advances in the generation of photonics materials over large areas and volumes, using the paradigm of shear-induced ordering of composite polymer nanoparticles. The hard-core/soft-shell design of these particles produces quasi-solid "gum-like" media, with a viscoelastic ensemble response to applied shear, in marked contrast to the behavior seen in colloidal and granular systems...

The objective of this paper is to investigate the response of a cold-formed steel framed building subjected to earthquake excitation primarily through nonlinear time history analysis employing the incremental dynamic analysis (IDA) framework. The two-story archetype building from the Cold-Formed Steel – Network for Earthquake Engineering Simulation (CFS-NEES) project is analyzed using OpenSees....

Nowadays, steel shear walls are used as efficient lateral-load-resistant systems due to their high lateral stiffness and carrying capacity. In this paper, the effect of substituting a shape memory alloy (SMA) material is investigated instead of using conventional steel in the shear wall. A numerical study is conducted using finite element method (FEM) by OpenSees software. For this purpose, at ...

BACKGROUND Chairside softliners are used more frequently than is reported and studies regarding the bond strength of chairside softliners to heat-polymerized denture base resin are few and limited. Hence, this study was conducted to comparatively evaluate the shear bond strength of two chairside soft relining materials viz., autopolymerizing plasticized acrylic resin liner and a silicone-based ...

STATEMENT OF PROBLEM The increase in the use of metal-ceramic restorations and a high prevalence of porcelain chipping entails introducing an alloy which is more compatible with porcelain and causes a stronger bond between the two. This study is to compare shear bond strength of three base-metal alloys and one noble alloy with the commonly used VMK Master Porcelain. MATERIALS AND METHOD Three...

At the submicron scale, an elastic fiber adheres to a rigid surface when the surface forces induced by electrostatic, capillary, or van der Waals interactions exceed the elastic restoring forces for bending. Adhesion is aided by the application of a shear load to the base of the fiber, which will initiate or increase the length of side contact. The presence of a shear force is necessary for the...

[1] We calculated the elasticity of (Mg,Fe)SiO3-perovskite, using the plane-wave pseudopotential method for a pressure range that encompasses the earth’s lower mantle. Adding 25 mol% FeSiO3 to the Mg endmember decreases the shear modulus by 6% at zero pressure and by 8% at core mantle boundary pressures. The bulk modulus is less affected by iron, increasing by 2% at zero pressure and by 1% at t...

This study investigates the effects of micro- and nano-sized SiC powder on the rheological behavior of Al based feedstocks for powder injection molding (PIM).  Different compositions of Al feedstocks with additions of micro and nano-SiC powder were prepared and their rheological properties were measured with a rotational rheometer. The effects of SiC content and shear rate were investigated and...