We have developed a method for the three-dimensional (3D) printing of continuous fiber-reinforced thermoplastics based on fused-deposition modeling. The technique enables direct 3D fabrication without the use of molds and may become the standard next-generation composite fabrication methodology. A thermoplastic filament and continuous fibers were separately supplied to the 3D printer and the fi...

fiber reinforced composites are widely used instead of traditional materials in various technological applications. therefore, by considering the extensive applications of these materials, a proper knowledge of their impact behavior (from low- to high-velocity) as well as their static behavior is necessary. in order to study the effects of strain rates on the behavior of these materials, specia...

─This paper presents the retrofitting of beam-column joint using CFRP (Carbon Fiber Reinforced Polymer) and steel plate. This specimen was tested until failure up to 1.0% drift. This joint suffered severe damages and diagonal cracks at upper crack at upper column before retrofitted. CFRP were wrapped at corbel, bottom and top of the column. Steel plates with bonding were attached to the two bea...

In present work 2D FE (finite element) analysis of deformation and damage evolution site in fiber reinforced composites are carried out. The fiber cracking point and stresses is simulated in the fibers/matrix interface, using the ANSYS FE software at varying volume fractions. The effect of matrix cracks and the interface strength on the fiber failure is investigated. Multi-fibre model were used...

This article reports the effective usage of redmud(RM) an industrial waste ,as a  novel filler in polymer matrix. The composite has been fabricated with redmud as secondary reinforcement in banana fiber reinforced polyester (BFRP) using compression molding technique. The mechanical properties such as tensile, flexural and impact strength have been studied for different fiber weight percentage, ...

Fiber-reinforced polymer composites (FRCs) have shown great promise as high strength structural materials due to their high stiffness to weight ratio and their ease in processing. They have found extensive use in aerospace, automotive, construction, and recreational equipment material applications. Research in polymer-based nanocomposites (PNCs) has shown explosive growth in the past decade wit...