Abstract In this paper, the effect of different tooth side clearances on fatigue characteristics bevel gears under alternating torque is investigated using finite element analysis technology. The article first determines structure form and main parameters gear completes establishment three-dimensional model transmission. Then, based principle analysis, are simulated by ANSYS workbench software....

This paper proposes a method to determine the shape factor in heat transfer model of silicon electrothermal V-shaped micro actuators by using ANSYS WORKBENCH. The rectangular cross-section (w-width and h-thickness) is built investigate from beam substrate through thin layer air. Moreover, this can be used influence width thickness or height on its factor. Through simulation, lowest emission gen...

In this study, with their high strength-to-weight ratio, adaptability, and lack of corrosion, composite materials are widely used in aircraft construction can be considered an acceptable metal substitute by all parties involved. Static load tests have been performed under identical conditions stresses, but the layer sequence was changed. The Ansys workbench ACP-pre is utilized to analyze data. ...

Penelitian ini dilakukan dengan tujuan untuk mengetahui karakteristik material swing arm pada sepeda motor Honda Supra X 125R dalam kondisi pembebanan dinamis. Analisa dinamika nilai frekuensi natural dan displacement maksimum modal analysis. Metode yang digunakan penelitian adalah simulasi FEM membuat pemodelan 3D menggunakan software Autodesk Inventor. Selanjutnya model disimulasikan Ansys Wo...

Structures that have components require particularly strong strengthening without the use of large amounts material grid stiffened structures, modified for purposes single application structure is utilised in. Modern structures evolved and deployed advanced materials, designs manufacturing techniques. Due to additive boom in industries, any such manufactured with metals significantly cheaper wh...

In this study, the mechanical properties, fatigue life, and endurance limit values were investigated for composite materials containing natural fiber reinforcement (flax, wool), which arranged by 0°/90° Angle orientation a combination of 45°/-45° angle orientation, then wool woven mixed flax unidirectional interfered with jute woven. Binary blends epoxy polyurethane at v various weight percent ...

Problem Statement: This article discusses analytical and numerical studies to determine the stress-strain state (SSS) of a concrete or fiber-reinforced block in truss node from bend-welded profiles (BWP). At same time, distinctive feature is that nodes are strengthened locally. Problems solved stresses element for common section with vertical axis symmetry, taking into account linear relationsh...

Astatine-211 is an alpha emitter that has been identified as a good candidate for targeted therapy. There increasing demand on this radionuclide. Very intense beam from linac being put in operation nowadays could be used to meet demand. This document presents the design exploration of concepts liquid bismuth targets dedicated astatine-211 production. Three are presented and analyzed: capsule, f...

Tabiatta her cismin “Doğal Titreşim Frekansı” olarak adlandırılan sonsuz sayıda titreşim frekansı ve genliği vardır. Gelişen bilgisayar teknolojisi sayesinde, karmaşık yapıların doğal frekanslarının hesaplanması hızlı doğru bir şekilde gerçekleştirilmektedir. Bu çalışmada Endüstriyel sünger ezme makinasının frekansları sonlu elemanlar yöntemleri ile analiz edilmiştir. Sonlu yöntemi katı mekaniğ...

Abstract Zirconia toughened alumina particles (ZTAp)/high chromium cast iron (HCCI) matrix honeycomb composites were successfully prepared by a non-pressure infiltration casting process. This paper systematically investigates the effect of pore size (6 mm, 8 10 12 mm) on compression resistance structure under same wall thickness condition. Through simulation software Ansys Workbench and perform...