This study investigated the effect, on reactor performance and biomass retention inside the bed, of the material used to make the supports of anaerobic fixed-bed reactors. Three inert supports of similar shape but made of three different materials polyvinyl chloride, polypropylene, high-density polyethylene were manufactured and used. All three supports had the same specific surface area but di...

In this study, a newly established bench-scale thermophilic continuously stirred fluidized bed reactor (CSFBR) was applied for anaerobic co-digestion of food waste (FW) with grease trap (GTW). The performance CSFBR regarding stability and treatment efficiency inspected through laboratory contrast experiment two traditional continuous tank reactors (CSTRs). the OLR range 3.19–7.41 g COD/L/d, met...

Liquid injection in fluidized beds is used to add reactants or improve the heat management reactor. This will increase complexity of reactor due formation agglomerates. In this work effect on particle temperature distribution a bed porous particles determined experimentally using image velocimetry and infra-red thermography. The main property influencing specific surface area. addition, porosit...

Nowadays, fluidized bed plays an important part in industry. The design of this kind of reactor requires knowing the interfacial area between two phases and this interfacial area leads to calculate the solid holdup in the bed. Consequently achieving interfacial area between gas and solid in the bed experimentally is so significant. On interfacial area measurement in fluidized bed with gas has b...

In this research, an experimental study to evaluate nutrient removal from synthetic wastewater by a lab-scale moving bed biofilm process was investigated. Also, kinetic analysis of the process with regard to phosphorus and nitrogen removal was studied with different mathematical models. For nutrient removal, the moving bed biofilm process was applied in series with anaerobic, anoxic and aerobic...

The syngas chemical looping (SCL) process developed at the Ohio State University can efficiently convert coal derived syngas into hydrogen with in-situ CO2 capture. In this novel process, two moving bed units are used to convert syngas into hydrogen through the assistance of an oxygen carrier particle. A third unit, an entrained bed combustor, is used to convey the oxygen carrier particles to c...

In this study, experiments have been conducted to evaluate the organics and nutrients removal from synthetic wastewater by a laboratory scale moving bed biofilm process. For nutrients removal, moving bed biofilm process has been applied in series with anaerobic, anoxic and aerobic units in four separate reactors. Moving bed biofilm reactors were operated continuously at different loading rates ...

This study contributes to the improvement of low-cost biotechnology for wastewater treatment in constructed wetlands (CWs). Constructed wetlands are energy efficient engineered systems that mimic the treatment processes of natural wetlands, removing polluting organic matter, nutrients, and pathogens from water. The aim of this study was to investigate the advisability of the inoculation of hori...

A fluidized bed reactor with ultraviolet lamp and TiO2/silica photo-catalyst prepared in our laboratory was used as a photo-reactor to degrade toluene in a simulated toluene-air mixture. The effects of operating parameters including initial toluene concentration, superficial gas velocity, ultraviolet light intensity and catalyst bed height on degradation rate of toluene have been investigated i...