نتایج جستجو برای: aluminum matrix composite
تعداد نتایج: 524203 فیلتر نتایج به سال:
Aluminum composites with various reinforcement materials are widely applicable in advanced engineering due to their better strength weight ratio, stiffness, and high thermal conductivity as well excellent wear corrosion properties. This stimulates curiosity study aluminum metal matrix composite reinforced waste glass improve its mechanical physical The specimens were prepared using stir-casting...
TiC nanofibers reinforced Al matrix composites were produced by High Frequency Induction Heat Sintering (HFIHS).The titanium carbide nanofibers with an average diameter of 90 nm are first prepared by electrospinning technique and high temperature calcination process. A composite solution containing polyacrylonitrile and titanium isopropoxide is first electrospun into the nanofibers, which are s...
The issue of the nanocomposites’ synthesis using aluminum matrixes, reinforced with carbon nanotubes, high physical and mechanical performance capabilities, as related to achieving homogeneous dispersion nanotubes in composite’s matrix has been considered. Basics preparation technology have developed requirements for parameters so-called «normalized» mixture (highly-homogeneous terms volume dry...
in this research, synthesis and characterization of silver/alumina composite powders was investigated. this kind of metal/ceramic composite powders is used for fabrication of cutting tools inserts. the role of silver is toughening the final product. the powders were synthesized via co-precipitation method. the composition of the synthesized powders was ag/80% wt 〖al〗_2 o_3. silver nitrate, alum...
In this paper, an attempt has been made to experimental investigation the machinability of aluminum metal matrix composite (LM13/SiC/15p) during continuous turning of composite rods using carbide inserts. Base matrix material is Aluminium LM13 reinforced with 15 % weight by volume of Silicon carbide particles of mean diameter 20 μm to 40 μm is used. The main focus of investigation is to determi...
OBJECTIVE This study evaluated the influence of different surface treatments on the resin bond strength/light-cured characterizing materials (LCCMs), using the intrinsic characterization technique. The intrinsic technique is characterized by the use of LCCMs between the increments of resin composite (resin/thin film of LCCM/external layer of resin covering the LCCM). MATERIALS AND METHODS Usi...
Potential of widespread industrial applications of magnesium has been realized in recent years. A variety of magnesium alloy matrix composites are now being studied for mechanical properties. Since magnesium is the lightest structural metal, it can replace aluminum in existing applications for further weight savings. This review presents an overview of hollow particle filled magnesium matrix sy...
Effects of temperature on properties and behavior of a 20 vol % particulate SiC reinforced 6061 aluminum alloy and 6061 unreinforced Al alloy were investigated. Yield strength and elongation to failure were measured as a function of test temperatures up to 180^oC. In addition, the effects of holding time at 180^ oC on tensile properties and fracture mechanisms of the materials at this temperatu...
For the past decades researchers are showing immense interest to investigate the natural advantage of preparation of composites from minerals such as bauxite particles, and proved their effectiveness as cost effective reinforcing agents in fabrication of high performance composites. This study, is a new attempt in using the Iraqi natural bauxite powder with different proportions (2wt%, 4wt%, an...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید