The working principle of scanning acoustic microscope (SAM) is introduced, and the acoustic transmission action is analyzed according to the geometrical and structural characteristics of explosive/Aluminum-alloy binding. The adhesive status of the interface in some typical parts of the binding is detected by SAM and 30MHz ultrasonic focal field lens. The results show that the interfaces between...

In this investigation, the effect of friction stir processing (FSP) parameters such as rotational speed, traverse speed and plunge depth on the tensile strength of AA6063 aluminum alloy was studied. The experiments were carried out as per response surface methodology parametric design concepts to study the influence of various combinations of process parameters. Statistical optimization techniq...

The technological development of all kinds of lightweight transportation devices including vehicles, aircraft, ships, etc. has progressed markedly with the demand for energy saving and environmental protection. Aluminum alloy is in the spotlight as it is a suitable environmentally friendly material. However, deformation is a major problem during the welding process because aluminum alloy has a ...

A grinding force model is developed to predict the forces during the face grinding of cast iron and aluminum alloy 319. Design of experiments methods are used to create a response surface of four process parameters: feed rate, inclination angle of the grinding wheel profile, offset angle between the grinding wheel and the workpiece, and the peripheral speed of the wheel. For each material, thre...

The amorphous ternary metallic alloy Zr60Al15Ni25 was oxidized in dry oxygen in the temperature range 310 ±C to 410 ±C. Rutherford backscattering (RBS) and cross-sectional transmission electron microscopy (TEM) studies suggest that during this treatment an amorphous layer of zirconium-aluminum-oxide is formed at the surface. Nickel was depleted in the oxide and enriched in the amorphous alloy n...

It is well known that semi-solid forming could only obtain coarse-grained microstructure in a few alloy systems with a low melting point, such as aluminum and magnesium alloys. This work presents that semi-solid forming could also produce novel bimodal microstructure composed of nanostructured matrix and micro-sized (CoFe)Ti2 twins in a titanium alloy, Ti62Nb12.2Fe13.6Co6.4Al5.8. The semi-solid...

en-ac 48000 aluminum alloy is an important alloy in industries. machining of this alloy is of vital importance due to built-up edge and tool wear. three type of cutting tools including coated carbide (cd1810), uncoated carbide (h10), and polycrystalline diamond (cd10) have been used in this research in this paper, the effect of machining parameters including lubricant emulsion percentage and to...

In this work, the evolution of microstructure and the thermo-mechanical behavior of co pper and dilute copper alloy thin films was investigated. 0.3 to 2.0 μm thick film s were deposited by magnetron sputtering under ultra high vacuum conditions onto diffusion-barrier coated silicon substrates and subjected to wafer curvature measurements. Pure copper films annealed in ultra high vacuum exhibit...

although the solubility of oxygen in molten aluminum alloys is said to be negligible, the fresh surface of the melt oxidizes quickly in the air and an oxide film is formed on the melt surface. oxide-metal-oxide sandwich technique is a method for the study of short-time surface oxide films. in this research, air was blown at 0.5 atmosphere into the melts of al-1mg and al-6mg alloys by means of a...

Cobalt-nickel (Co-Ni) binary alloy nanowires of different compositions were co-deposited in the nanopores of highly ordered anodic aluminum oxide (AAO) templates from a single sulfate bath using alternating current (AC) electrodeposition. AC electrodeposition was accomplished without modifying or removing the barrier layer. Field emission scanning electron microscope was used to study the morph...