0010-938X/$ see front matter 2011 Elsevier Ltd. doi:10.1016/j.corsci.2011.04.027 ⇑ Corresponding author. E-mail address: [email protected] (S.V. L The cellular automata (CA) methodology is applied to the case of intergranular corrosion. Appropriate CA rules are generated which can reproduce and predict the advance of a corrosion front. The proposed model shows qualitative and quantitati...

To improve the understanding of the relation between composition, precipitation and the balance of strength and electrical conductivity (as a measure of the stress-corrosion resistance), a number of Al-Zn-Mg-Cu-Zr aluminium alloy plates with different Zn, Mg and Cu contents were produced and studied by Differential Scanning Calorimetry (DSC). It is shown that detailed analysis of the DSC data p...

Intensive melt shearing was achieved using a twin-screw machine to condition an aluminium alloy prior to solidification. The results show that intensive melt shearing has a significant grain-refining effect. In addition, the intensive melt shearing reduces both the volume fraction and the size of porosity. It can reduce the density index from 10.50% to 2.87% and the average size of porosity in ...

INTRODUCTION The aim of the present paper is to compare creep behaviour of aluminium-based alloy (2024AA) prepared by an identical technology with and without reinforcement by short alumina fibres and with two different orientations of fibres. The observed behaviour is analyzed in terms of back stresses obtained by threshold stress approach from steady-state data or by the internal stress appro...

Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...

Normal 0 false false false EN-US X-NONE AR-SA The ratio of compression yield strength to the initial tensile yield strength is called Bauschinger effect factor, BEF. A nonlinear strain hardening mathematical model is proposed for 7075 aluminium alloy (A7075). Uniaxial tension-compression experimental data are used to figure out a suitable model to study the BEF. Hence, uniaxial tension-co...

The purpose of this research is to achieve the optimal parameters for producing forged aluminium alloy 7075 aircraft door bracket by using finite element modelling (FEM) with commercial DEFORM-3D V6.1 and physical simulations with plasticine and Plexiglas dies. Also, forging speed has been examined as the main factor for controlling to produce a part without any defects. The results of Physical...

About 50% of metals used in Aerospace industries are Aluminium and Titanium alloys, Alloys such as Ti6Al4V, AL-7175, and AL7075 are used extensively in space vehicles, aviation, and automotive industries for having enhanced mechanical properties like High strength to weight ratio, low Thermal Expansion and better Corrosion resistance. Comparison of properties Aluminium and Titanium alloys shows...