نتایج جستجو برای: alumina ceramics
تعداد نتایج: 25893 فیلتر نتایج به سال:
The possibility of using the "Brazilian test" method to determination tensile strength sigma t composite zirconia ceramics small-size samples were demonstrated and reliability obtained values confirmed. It was found that dependence alumina toughened (stabilized by calcium oxide) with silica addition (CaO-ATZ + SiO 2 ceramics) on concentration in them has a maximum (sigma_t=450...
• As a result of grain size reduction, strength and hardness for 10Ce-1CaO 10Ce-1CaO-5Al2O3 increased compared to 10Ce-TZP. Aging resistance in all 10Ce-1CaO/ alumina composites. Measurement K I c by SEVNB VIF methods corroborate the difference between values obtained both methods. Ceria-stabilized zirconia-based composites have been developed aiming obtain ceramic materials with enhanced hardn...
bioinert ceramics, like alumina and zirconia are used mainly for replacements of bones, hip joints and for dental implants. partially stabilized zirconia ceramics (psz or tzp with 3 mol.% or 5 wt.% y2o3), appear as perspective bioinert ceramics because of their high strength and corrosion resistance. in order to fabricate complex shapes, it is essential to use a near net shape processing like g...
This study evaluated the influence of cyclic loading on zirconia bar-shaped specimens after being subjected to three different surface treatments: particle abrasion with either 50 μm or 110 μm alumina and grinding with diamond points, while polished specimens served as a control. Statistical analysis revealed significant reduction (38-67%) in flexure strength (P < 0.001) after three million cyc...
Grain boundary mobility and grain-liquid boundary mobility in ceramics vary vastly from material to material. Their characteristics are sensitive to the crystal structure, the nature of bonding, orientation, stoichiometry and composition. More directly, mobility can be lowered by decreasing the interfacial energy and anisotropy or increasing solute drag, liquid viscosity, particle pinning and g...
In this paper, penetration of high velocity impact of 4340 steel and tungsten carbide projectiles with specific shapes in to ceramic armor that includes 10 mm alumina (95%) is considered analytically and simulated with Ls-Dyna software. Bernoulli equation used to consider the penetration velocity in ceramics, shows that the penetration is better and easier by increasing projectile density. The ...
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
The effect of an additive 0.5 wt. % zirconium oxide on the spark plasma sintering (SPS) kinetics alumina powders has been studied. Ceramics were obtained by mixing in a planetary mill with grinding media from stabilized oxide. activation energy SPS was estimated using Young-Cutler model. It shown that density and average grain size ceramics submicron are significantly affected nonequilibrium st...
Bioinert ceramics, like alumina and zirconia are used mainly for replacements of bones, hip joints and for dental implants. Partially stabilized zirconia ceramics (PSZ or TZP with 3 mol.% or 5 wt.% Y2O3), appear as perspective bioinert ceramics because of their high strength and corrosion resistance. In order to fabricate complex shapes, it is essential to use a near ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید