An elevation in levels of circulating microparticles (MPs) due to high air pressure exposure and the associated inflammatory changes and vascular injury that occur with it may be due to oxidative stress. We hypothesized that these responses arise due to elevated partial pressures of N2 and not because of high-pressure O2. A comparison was made among high-pressure air, normoxic high-pressure N2,...

Turbocharged CNG engines produce high NOx emission due to the fuel type and high combustion temperature. In this research, the effects of lean-burn and waste gate opening pressure threshold on NOx emission are studied theoretically and experimentally at WOT condition as well as 13-mode ECE-R49 test cycle. A code is developed in MATLAB environment for predicting engine NOx and the results are va...

We present an optofluidic chip with integrated polymer interferometers for measuring both the microfluidic air pressure and flow rate. The chip contains a microfluidic circuit and optical cavities on a polymer which was defined by soft lithography. The pressure can be read out by imaging the interference patterns of the cavities. The air flow rate was then calculated from the differential press...

OBJECTIVES To investigate the effect of air-drying pressure during ceramic primer coating on zirconia/resin bonding and the surface characteristics of the primed zirconia. METHODS Two ceramic primers (Clearfil Ceramic Primer, CCP, Kuraray Medical Inc. and Z-Prime Plus, ZPP, Bisco Inc.) were applied on the surface of air-abraded zirconia (Katana zirconia, Noritake) and dried at 4 different air...

to examine hydraulics of lnapls in soil, the retention curves of diesel fuel and water were both determined by hanging column method. the soil retention parameters were obtained based on van genuchten, brooks-corey and campbell’s models. in addition, the soil hydraulic conductivity for both fluids were predicted based on mualem- brooks-corey, burdine- brooks-corey, mualem-van genuchten and camp...

The most favored model of humidity transduction views the cuticular wall of insect hygroreceptive sensilla as a hygromechanical transducer. Hygroscopic swelling or shrinking alters the geometry of the wall, deforming the dendritic membranes of the moist and dry cells. The small size the sensilla and their position surrounded by elevated structures creates technical difficulties to mechanically ...

BACKGROUND Positive-expiratory-pressure (PEP) therapy uses positive airway pressure generated by a either a fixed-orifice resistor or a threshold resistor. We hypothesized that tubing diameter and length, and the diameter of the PEP bottle's air-escape orifice would impact the PEP pressure delivered to the airway and determine whether the PEP bottle acts as a threshold resistor or a fixed-orifi...