Nano-ZnO was employed for the adsorption of 4C2NP from aqueous solutions in batch equilibriumexperiments to investigate its adsorption properties. The quantity of 4C2NP adsorbed onto nano- ZnOsurface was measured by UV-Vis spectrophotometer. The effects of contact time, adsorbent dose, pH, andinitial concentration of 4C2NP were investigated. The adsorption found to be strongly influenced by all...

Introduction: There are different methods for removal of cadmium from aqueous solutions. Adsorption based methods are among the bests. One of the most important aspects for adsorption techniques is the availability of an accessible and economical adsorbent. This study aims to investigate cadmium removal from aqueous solutions by walnuts shell waste. Materials and Methods: Walnut Shell (WS) was...

Pyrene removal by polycation-montmorillonite (MMT) composites and granulated activated carbon (GAC) in the presence of humic acid (HA) was examined. Pyrene, HA, and sorbent interactions were characterized by FTIR, fluorescence and zeta measurements, adsorption, and column filtration experiments. Pyrene binding coefficients to the macromolecules were in the order of PVPcoS (poly-4-vinylpiridine-...

The reaction of fly ash with a KOH solution was used to synthesize Linde F(K) zeolite, following which Fourier transform infrared spectroscopy were used to characterize the crystalline material. The competitive adsorption of Cu, Ni, Pb, and Cd onto this zeolite was subsequently studied in quaternary solution systems. The results show that the metal removal rates gradually increase with incr...

In this study adsorption of 1-chloro-4-nitrobenzene on single walled carbon nanotubes has been investigated.  The effect of contact time, pH, initial concentration of 1-chloro-4-nitrobenzene, adsorbent dosage and temperature on its adsorption has been carried out in order to find optimum adsorption conditions. Adsorption isotherms and related constants were also determined. Results showed that ...

Carbon slurry, dried in open air, has been used as an adsorbent material for the removal of nickel(II) from aqueous solutions at different experimental conditions in batch adsorption technique. The time required to attain equilibrium was found to be 50 minutes. The effects of initial concentration of Ni(II), particle size of adsorbent, adsorbent dose, temperature and pH on removal of nickel(II)...

Removal of perchlorate using either acid-washed zero-valent aluminum or aluminum hydroxide was studied in batch reactors under ambient temperature and pressure. Approximately 90-95% of perchlorate was removed within 24h in the presence of 35 g L(-1) aluminum at acidic pH (4.5+/-0.2). Although aluminum is a strong reductant, this study indicated no explicit evidence to support perchlorate reduct...

The adsorption of Cr(III) and As(III) by using coal ash from thermal power plants in batch mode ,The effect of adsorbent agitation speed, dose, pH, contact time and agitation speed on the adsorption of Cr(III) and As(III) by coal ash is examined. Adsorption equilibrium was achieved in 50–55 min. The Langmuir, Temkin and Freundlich adsorption isotherms were used to observed sorption phenomena. T...

Synthetic dyes are among the most common contaminants of the environment. Therefore, the aim of this study was investigation the removal of Basic Blue 41 (BB41) and Methylene Blue (MB) from industrial effluents by useing raw and modified rice stems. In this study raw and modified rice stems treated chemically with Citric Acid (CA) and were used to explore the potentiality of rice stems for ...

In this paper, novel L-lysine-modified graphene oxide (Lys-GO) was synthesized through amidation. The morphological and structural properties of Lys-GO were characterized using infrared spectrometry, scanning electronic microscopy and X-ray photoelectron spectroscopy. The as-prepared Lys-GO material was systematically investigated in a series of batch adsorption experiments for the removal of m...