This study evaluated the effect of microwave energy on the hardness, impact strength and flexural strength of the Clássico, Onda-Cryl and QC-20 acrylic resins. Aluminum die were embedded in metallic or plastic flasks with type III dental stone, in accordance with the traditional packing technique. A mixing powder/liquid ratio was used according to the manufacturer's instructions. After polymeri...

By using SMA resins as a polymeric surfactant in an emulsion polymerisation process, alone or in combination with other surfactants, the stability of the dispersion under different kinds of stress (chemical, high shear or freeze/thaw) is significantly improved. The presence of SMA copolymer, adsorbed at the surface of the particles of an acrylic dispersion, enhances the stability of the latex b...

Water may influence the mechanical properties of the acrylic resins. Thus, the effect of water storage on the impact strength (IS) of one denture base (Lucitone 550 - L) and four reline resins (Tokuyama Rebase II - T; UfiGel Hard - U; Kooliner - K; New Truliner - NT) was evaluated. Bars of L were made (60 x 6 x 2 mm) and relined (2 mm) with T, U, K, NT and L. Intact specimens of each material (...

STATEMENT OF PROBLEM Disinfection of prostheses with chemical solutions has deleterious effects on dentures. The appropriate power setting of microwave for disinfection, without affecting denture base properties, is a controversy. PURPOSE To evaluate and compare the effect of simulated microwave disinfection at a recommended power setting on the mechanical properties of three denture base hea...

Background and Aim: There is a gap of information on the effect of time, disinfectant, and storage conditions on the dimensional stability of direct post patterns made of self-cure acrylic resins. This study assessed the effect of Deconex® and wet or dry stor-age conditions on the dimensional stability of post patterns made of Duralay and GC acrylic resins. Materials and Methods: Sixty spe...

The purpose of this study was to quantitatively evaluate the effect of staining solutions by spectrophotometric method on color stability of the commercially available acrylic denture base resins polymerized by different methods of cure, materials, and immersion periods. Commercially available heat cure resin (Travelon) and self cure resin (RR repair material) were selected for the study. In ca...

The absence or poor chemical bonding of acrylic resin to Cobalt-Chromium metal frameworks, often introduces microleakage and bond failure at the interface. The aim of this study was to compare the shear bond strength of sandblasted cast and ingot cobaltchromium alloy to heat-cured and self-cured acrylic resins primed with four different metal primers. Fifty Co-Cr Ingot and fifty cast specimens ...

Due to the changes in the composition and processing of acrylic resins, it seems appropriate to evaluate the influence of polymerization methods about the alteration of occlusal vertical dimension and the horizontal positioning of artificial teeth of total dentures. For this, 64 specimens were made, simulating a maxillary total denture waxed from a standard maxillary denture. The experimental s...

Purpose: The aim of this study is to evaluate effectiveness of regularly used disinfectant solution in the disinfection of acrylic resin specimens contaminated with Candida albicans. Materials and methods: Thirty six acrylic resin specimens contaminated in vitro with 1.5×10 8 cfu/ml suspensions of microorganisms were immersed in disinfectants for 10 minutes, the control group was not submitted ...

This study evaluated water sorption in heat-polymerized acrylic resins processed in monomaxillary flasks by water bath and in bimaxillary flasks by microwave energy and water bath. Fifty heat-polymerized acrylic resin specimens were fabricated according to the 12th specification of the American Dental Association and assigned to 3 groups: group 1 was processed by water bath in monomaxillary met...