Original scientific paper The experiment centres on two and three body abrasion in three-phase waste-based composite systems. The composite systems abrasion resistance is defined not only by the physical-mechanical relationships of the separate phases of the composite, but also by the mutual interaction of the phases and on the matrix-filler interface. To describe the composite system abrasion ...

Abrasive waterjet machining (AWJM) is one of the modern machining process for difficult to cut materials. It is an environment friendly and relatively inexpensive process with reasonably high material removal rate. In all the machining processes the quality of the work piece is depends on various design parameters. The process parameters which mainly affect the quality of cutting in AWJM are Hy...

Problem statement: Abrasive is one of key influencing factors on the polished surface quality in Chemical Mechanical Polishing (CMP). Solid abrasives in CMP slurries are easy to cause polishing scratches. It is well known that reducing the hardness of abrasives would improve the polished surface quality. Therefore, the change in structure or shape of the abrasives means a change in polished sur...

Acoustic Emission (AE) sensing technique is used as a tool for on-line monitoring of hydro-abrasive erosion (HAE) of pre-cracked multiphase materials. As reference materials, ®ve types of concrete materials were used for the experimental study. Compression tests were performed to determine the mechanical properties and the failure behavior of these materials. Erosion parameters, such as abrasiv...

Abrasive blasting materials, such as coal slag garnet and copper slag, are often used for cleaning metal surfaces to remove rust and to prepare a surface before the application of a coating. The pre-blast and post-blast (spent) abrasive materials contain traces of heavy metal constituents such as Cr, Mn, Ni, Pb Fe, and Ba. Hence, the health risk associated with the resultant particulate emissio...

Being subjected to a high-pressure abrasive water jet, solid samples will experience an essential variation of both internal stress and physical characteristics, which is closely associated with the kinetic energy attached to the abrasive particles involved in the jet stream. Here, experiments were performed, with particular emphasis being placed on the kinetic energy attenuation and turbulent ...

In this paper a test bench of interior honing processes was studied, analyzed and adjusted in order to improve its performance. The system consists of a horizontal honing test machine where tubes are placed in a rotating device and a honing head, provided with three abrasive stones, that has alternative linear movement. The abrasive stones hone the interior surface of the tubes. The system has ...

The effect of brushing with two abrasive levels on the fluoride release of high-viscosity glass ionomers (GIs) was investigated. Forty-eight GI discs were fabricated and randomly assigned to one of the four groups. Treatments, performed for 30 days, included exposure to a carboxymethylcellulose (CMC) solution without fluoride (CMC-F), CMC with 275 ppm fluoride (CMC+F), CMC with fluoride plus br...

Cemented carbides are outstanding engineering materials widely used in quite demanding material removal applications. In this study, laser surface texturing is implemented for enhancing, at the surface level, the intrinsic bulk-like tribological performance of these materials. In this regard, hexagonal pyramids patterned on the cutting surface of a tungsten cemented carbide grade (WC–CoNi) have...

In chemical mechanical polishing (CMP), a rigid wafer is forced on a rough elastomeric polishing pad, while a slurry containing abrasive particles flows through the interface. One of the important factors that influence the material removal rate in CMP is the magnitude of contact force transmitted to the abrasive particles trapped at the contact interface. The total push-down force is distribut...