Now a days, significant amount of aluminium alloy are being used to fabricate components such as engine blocks, cylinder heads, suspension control arms, wheels and pistons. In response to consumer demands for the increase in performance, the use of aluminium has grown dramatically in the recent years. So in order to produce a sound LM6 (Al-12%Si) Aluminium alloy casting, a new approach is made ...

Open cell, lattice truss structures have been made by folding perforated 6061 aluminium alloy sheets. Simple air brazing is used to construct sandwich panels with cellular core relative densities between 0.02 and 0.08. Some panels were quenched and aged while others were tested in an annealed condition. The measured peak compressive strengths varied from 0.7 to 20 MPa, increasing with core rela...

On sulphidation o f pre-oxidized yttriumimplanted Incoloy 800H an improvement in sulphidation resistance is obtained. Preoxidized krypton-implanted alloy and aluminium-implanted alloy have sulphidation rates which are about the same as that o f non-implanted pre-oxidized Incoloy 80OH. Scanning electron microscopy observations show that one o f the effects o f y t tr ium implantation is to decre...

The purpose of this study is to predict the mass loss of newly developed aluminium based alloy. Two different alloys are prepared by cladding process and the sliding friction and wear properties of this alloy against high carbon high chromium steel are investigated at different normal loads (50 N, 60 N and 70 N) under different sliding distances. Tests are carried at a constant speed of 1 m/sec...

The experimental investigation of hybrid metal matrix composites with fly ash and graphite reinforced aluminium alloy (Al 6061) composites samples, processed by stir casting route are reported. The aluminium alloy was reinforced with 3 wt.%, 6 wt.%, 9 wt.% fly ash and fixed 3 wt.% of graphite to mixture the hybrid composite. Hardness of the hybrid composite were tested it was found that when th...

Influences of microstructure and properties of an aluminium alloy on resistance to dynamic perforation are predicted using a decoupled multiscale modelling approach. At the scale of individual grains, a crystal plasticity model is developed accounting for finite elastic and plastic deformations, thermal softening and energy storage mechanisms linked to microscopic residual stress fields induced...