The compressive creep and the recovery of commercially available composites, 2 kinds for posterior and 2 kinds for anterior use, in water were examined. In posterior composites, creep strain after 500h at a stress level of 8.3 kgf/mm2 was significantly small (within 1%). The results of the compressive creep test showed that posterior composites would be resistant to occlusal stress. Creep strai...

This paper presents the application of a life fraction hardening rule to the analytical calculation of creep in hot section components. Accurate prediction of creep is critical to assuring the mechanical integrity of heavy-duty, industrial gas turbine (IGT) hardware. The accuracy of such predictions depend upon both the creep models assumed and how those models are implemented in a finite eleme...

In Exp. 1, 50 sows and their litters were used to determine the effects of adding a feed flavor to the creep diet on the proportion of pigs consuming creep feed ("eaters") and preweaning performance. Sows were blocked according to parity and date of farrowing and allotted to 2 experimental treatments: 1) litters fed a creep diet with no flavor (negative control) or 2) negative control diet with...

PURPOSE This paper addresses the diagnostic idea proposed in [11] to measure the parameter called rate of creep of axillary fold of tissue using modified Harpenden skinfold caliper in order to distinguish normal and edematous tissue. Our simulations are intended to help understanding the creep phenomenon and creep rate parameter as a sensitive indicator of edema existence. The parametric analys...

In the process of heavy oil thermal recovery, the creep of strata can often be accelerated due to injection pressure, the temperature of steam, the structural characteristics of rock itself and other factors. However, the effect of creep in strata may cause various types of damage in underground mining, such as fracture or deformation of oil casings, and so on. The mechanism of fluid–structure ...

This paper reports (1) the latest development and application of a modified hyperbolic sine law for minimum creep strain rate and stress for both low Cr and high Cr steels, and (2) the development of a creep fracture criterion based on cavity area fraction along grain boundaries for high Cr steel. This work is part of the fundamental development of creep damage constitutive equations which were...

Title of Dissertation: CREEP CORROSION OVER PLASTIC ENCAPSULATED MICROCIRCUIT PACKAGES WITH NOBLE METAL PREPLATED LEADFRAMES Ping Zhao, Doctor of Philosophy, 2005 Dissertation Directed By: Dr. Michael Pecht, Professor, Department of Mechanical Engineering Field failures were observed to be caused by the bridging of corrosion products across lead fingers. This phenomenon was identified as creep ...

The work presented in this paper is related to the determination of the creep properties for a P91 pipe weldment at 625 C, which forms part of a collaborative European project (Weldon). A Kachanov type, one damage variable, multi-axial material behaviour model was used to represent the material creep behaviour. The uniaxial material constants for the parent material and weld metal were determin...

Synopsis: This study presents the experimental results on properties of concrete with replacement of natural aggregate by recycled concrete aggregate (RCA). Experimental data on the creep behavior of concrete mixtures (basic and drying creep) was obtained. The replacement factor of natural aggregate by RCA were 0%, 15%, 30%, 60% and 100%, and the test conditions were 50% RH and 20°C. The result...

At high pressure prevailing in the lower mantle, lattice friction opposed to dislocation glide becomes very high, as reported in recent experimental and theoretical studies. We examine the consequences of this high resistance to plastic shear exhibited by ringwoodite and bridgmanite on creep mechanisms under mantle conditions. To evaluate the consequences of this effect, we model dislocation cr...