Pyrolysis of palm kernel shell in a fixed-bed reactor was studied in this paper. The objectives were to investigate the effect of pyrolysis temperature and particle size on the products yield and to characterize the bio-oil product. In order to get the optimum pyrolysis parameters on bio-oil yield, temperatures of 350, 400, 450, 500 and 550 °C and particle sizes of 212–300 μm, 300–600 μm, 600μm...

To allow an easy individuation of the more suitable working conditions (temperature, pressure, flow rate, etc.) to be adopted to carry out the extraction of food grade oils from different substrates by supercritical CO2 (Sc-CO2), a simplified kinetic approach has been introduced. This kinetic model was utilised to describe supercritical fluid extraction (SFE) of oil by Sc-CO2 not only from seed...

Joule-Thomson cooling systems are used in refrigeration processes such as cryogenic gas liquefaction. Although extensive studies have been carried out by researchers, most of them include cryogenic heat exchangers and their associated fields. In the current study, an attempt was made to indicate the effect of using inappropriate operational conditions in a cryogenic Joule-Thomson cooling system...

Turbulent flow of water in a narrow gap of an emulsifier is investigated experimentally using micro-PIV (micro Particle Image Velocimetry) technique and compared with numerical predictions performed using the commercial code Fluent. The purpose of the investigations is to develop a procedure for wellcontrolled generation of mono-disperse suspension of micro droplets. These droplets will form a ...

An analytical study was performed to study effects of thermo-diffusion and chemical reactions on a three-dimensional MHD mixed convective flow of dissipative fluid along an infinite vertical porous plate with transverse sinusoidal suction velocity. The parabolic partial differential equations governing the fluid flow, heat transfer, and mass transfer were solved using perturbation technique and...

Refrigerant mass flow rate is an important measurement for monitoring equipment performance and enabling fault detection and diagnostics. However, a traditional mass flow meter is expensive to purchase and install. A virtual refrigerant mass flow sensor (VRMF) uses a mathematical model to estimate flow rate using low-cost measurements and can potentially be implemented at low cost. This study e...

models the water flooding of an oil reservoir [6]. Water flooding involves the injection of water, which is immiscible with oil, into certain wells of the reservoir to force oil out at others. In this case, s = s(x, t) is the saturation of water (i.e., the volume fraction of water in the total fluid, 0 < s d 1 ), and g= g(s) is the particle velocity of the water. Consequently, since the total v...

Transportation of unrefined crude oil from the production unit to a refinery or large storage area by a pipeline is difficult due to the different properties of crude in various areas. Thus, the design of a crude oil pipeline is a very complex and time consuming process, when considering all the various parameters. There were three very important parameters that play a significant role in the t...

In a refrigeration cycle, some of the oil circulates and resides in cycle components. The worst scenario of oil circulation in the cycle is where a large amount of oil is retained outside the compressor. High oil retention causes system performance and reliability degradations. The purpose of this study is to experimentally clarify oil retention and pressure drop characteristics due to the pres...