the effect of t6 heat treatment on the microstructure and wear behavior of al-332 piston alloy containing 1.2wt% iron was investigated. the results showed that the t6 heat treatment changed the morphology of acicular eutectic si particles to a more spherical form. the heat treatment also reduced the average length and blunted the needle-like ?- phase intermetallics through dissolution and fragm...

Friction and wear tests were performed on AISI 1045 steel specimens with different initial roughness parameters, machined by a creep-feed dry grinding process, to study the friction and wear behavior on a pin-on-disc tester in dry sliding conditions. Average surface roughness (Ra), root mean square (Rq), skewness (Rsk) and kurtosis (Rku) were involved in order to analyse the influence of the fr...

The aim of this study was to evaluate the friction and wear behavior of ultra high molecular weight polyethylene (UHMWPE) against 3Y-TZP and a novel 3Y-TZP/niobium (Nb) biocomposite. The ceramic and the biocomposite materials were subjected to an accelerated aging process to evaluate the changes in the tribological behavior after this treatment. To carry out the tribological tests, a reciprocat...

Valuable insights into the wear-corrosion behavior of metals, as well as into the tribocorrosion field through the development of simulation models of tribocorrosion experiments, can contribute in rationalizing wearaccelerated experiments and their open circuit potential (OCP) behavior under rubbing. These results demonstrate that mathematical models of controlled tribo-electrochemical contacts...

Influence of laser treatment on mechanical properties, wear resistance, and Vickers hardness of aluminum alloy was studied. The specimens were treated by using Nd:YaG laser of energy 780 mj, wavelength 512 nm, and duration time 8 ns. The wear behavior of the specimens was studied for all specimens before and after treatment by Nd:YaG laser and the dry wear experiments were carried out by sing p...

The present study examined wear characteristics of A356/melon shell ash particulate composites. Dry-sliding the stainless steel ball against specimen disc revealed the abrasive wear behavior of the composites under loads of 2 and 5N. The composite showed lower wear rate of 2.182 × 10-4 mm3/Nm at 20 wt% reinforced material under load of 5N. Results showed that wear rate decreased significantly w...

The popularity of composite materials usage is increasing due to its superior strength characters racing the traditional materials in strength to weight ratio. The developments of new materials are on the anvil and are growing day by day. In this work, two-body abrasive wear test with different loads and abrading distances were performed at room temperature by using a pin on a disk apparatus to...

This paper aims to present an experimental investigation for optimum tribological behavior (wear depth and coefficient of friction) of electroless Ni-P-Cu coatings based on four process parameters using artificial bee colony algorithm. Experiments are carried out by utilizing the combination of three coating process parameters, namely, nickel sulphate, sodium hypophosphite, and copper sulphate,...

The atomic force microscope (AFM) tip is often used as a model of a single sliding asperity in order to study nanotribological phenomena including friction, adhesion, and wear. In particular, recent work has demonstrated a wear regime in which surface modification appears to occur in an atom-by-atom fashion. Several authors have modeled this atomic-scale wear behavior as a thermally activated b...

BACKGROUND Wear-related failures and instabilities are frequent failure mechanisms of total knee replacements. High-conforming designs may provide additional stability for the joint. This study analyzes the effects of a ligamentous insufficiency on the stability and the wear behavior of a high-conforming knee design. METHODS Two simulator wear tests were performed on a high-conforming total k...