The tunneling magnetoresistance sTMRd of thin dielectric tunnel barriers that are sandwiched between pairs of ferromagnetic metal thin films is highly sensitive to the barrier layer atomic scale thickness, the uniformity in thickness, and the composition. Widely used AlOx barriers are formed by the oxidation of 1–2 nm thick aluminum layers vapor deposited onto one of the ferromagnetic metal ele...

The suitability of three vapor deposition techniques for pore size modification was evaluated using polycarbonate track etched membranes as model supports. A feature scale model was employed to predict the pore geometry after modification and the resulting pure water flux. Physical vapor deposition (PVD) and pulsed plasma-enhanced chemical vapor deposition (PECVD), naturally, form asymmetric na...

thin films of sno2 nanowires were successfully prepared by using chemical vapor deposition (cvd) process on quartz substrates. afterwards, a thin  layer of palladium (pd) as a catalyst was coated on top of nanowires. for the deposition of pd, a simple and low cost technique of spray pyrolysis was employed, which caused an intensive enhancement on the sensing response of fabricated sensors. prep...

[1] We assess the consistency (closure) between solar beam attenuation by aerosols and water vapor measured by airborne Sun photometry and derived from airborne in situ and ship-based lidar measurements during the April 2001 Asian Pacific Regional Aerosol Characterization Experiment (ACE-Asia). The airborne data presented here were obtained aboard the Twin Otter aircraft. Comparing aerosol exti...

Steady-state evaporation of a saturated liquid droplet and its levitation over a solid surface due to momentum-induced pressure in the vapor film is studied by solving the axisymmetric governing equation numerically. A previous on~ime~onal analysis shows that the distance (or gap) between the solid surface and the droplet decreases when the vapor can penetrate the solid. For porous layers, this...

A multilayer composite ceramic membrane was prepared by depositing a nano-scale layer of SiO2 on top of a modified porous alumina support by chemical vapor deposition (CVD) method. The modification of the support was carried out by adding a graded layer of Al2O3 (γ-alumina phase), using sol-gel method. An optimized temperature of 700 K for intermediate layer calcination was gained by XRD analys...

To combine the processes of gas nitriding and oxidation in water vapor, effects atmospheric nitrogen potential dissociated ammonia on formation surface diffusion nitride phases are studied. Modification layer with oxygen was carried out by zone at second stage obtaining an oxycarbonitride layer. The corrosion wear-resistant properties nitride-oxide t lowest investigated, depending phase changes...

Four thin-film adhesion characterization methods are proposed. Two of them are surface acoustic wave based and the two others emphasize the complementary nature between acoustic microscopy, scratch test and tensile experiments. A continuous wave scanning acoustic microscope was used to propagate surface modes in the specimen and to measure the surface acoustic wave velocity as a function of the...

A directly self-crystallized graphene layer with transfer-free process on arbitrary insulator by Ni vapor-assisted growth at growth temperatures between 950 to 1100 °C via conventional chemical vapor deposition (CVD) system was developed and demonstrated. Domain sizes of graphene were confirmed by Raman spectra from ~12 nm at growth temperature of 1000 °C to ~32 nm at growth temperature of 1100...