In article 2100068, S. T. Britt and P. C. Pistorius study liquid titanium-bearing iron (saturated with carbon) wets alumina crucibles. Wetting is caused by reaction between dissolved titanium alumina; it can be prevented pre-treating the crucible a flux containing calcium fluoride. By avoiding wetting, clear images of carbide formation on droplet obtained, during confocal scanning laser microsc...

Composite materials are playing major and vital role in various sectors especially in aeronautical, defence and automotive sectors. It is preferable because of obtaining unique characteristics such as high specific strength, high stiffness, high corrosion resistance and low density. In the present work deals with the influence of Titanium carbide and Titanium boride reinforcements in different ...

The consolidation of fiber-reinforced titanium matrix composite (TMC) monotapes produced by spray deposition is an important step in the manufacture of TMC components. The performance of this class of composites is controlled by fiber-matrix properties and by the composite’s relative density, fiber microbending stress/fracture and by the interfacial reaction layer thickness at the fiber-matrix ...

High surface area nanoporous carbon has been prepared by thermo-chemical etching of titanium carbide TiC in chlorine in the temperature range 200–1200 °C. Structural analysis showed that this carbide-derived carbon (CDC) was highly disordered at all synthesis temperatures. Higher temperature resulted in increasing ordering and formation of bent graphene sheets or thin graphitic ribbons. Soft X-...

The room-temperature synthesis of a new two-dimensional (2D) zirconium-containing carbide, Zr3C2T(z) MXene is presented. In contrast to traditional preparation of MXene, the layered ternary Zr3Al3C5 material instead of MAX phases is used as source under hydrofluoric acid treatment. The structural, mechanical, and electronic properties of the synthesized 2D carbide are investigated, combined wit...

Nanocomposite of titanium diboride/titanium carbide was fabricated by combustion synthesis of mechanically milled reactant powders. The stoichiometric mixture of Ti and B4C as starting materials milled for 1, 3, 6 and 9 h. Milled powders pressed to form pellets then green compacts were placed in a tube furnace that preheated to 1100 oC in inert atmosphere (Ar).The samples were investigated by X...

The study was focused on the machined surface quality of titanium alloy under different milling conditions, including milling speed, tool rake angle and cooling method. The surface quality was investigated in terms of residual stress and surface roughness. The results show that the compressive residual stresses are generated on the machined surface under all milling conditions. The compressive ...

TiC-Ti-Al mixed powders and TC4 titanium alloy foils were overlapped layer-by-layer in the graphite die. The TC4-based laminated composite sheets reinforced by Ti aluminide and carbide were successfully fabricated via spark plasma sintering (SPS) at 1100 °C with a well-bonded interface. The composite layers were mainly composed of TiAl, Ti₃Al, Ti₂AlC, and Ti₃AlC₂ phases. The carbides particles ...