The effect of thermal cycling treatments on the thermal stability and mechanical properties of a Ti48Zr20Nb12Cu5Be15 bulk metallic glass composite (BMGC) has been investigated. Results show that moderate thermal cycles in a temperature range of −196 ◦C (cryogenic temperature, CT) to 25 ◦C (room temperature, RT) or annealing time at CT has not induced obvious changes of thermal stability and the...

Based on the electrochemical and thermal model, a coupled electro-thermal runaway model was developed and implemented using finite element methods. The thermal decomposition reactions when the battery temperature exceeds the material decomposition temperature were embedded into the model. The temperature variations of a lithium titanate battery during a series of charge-discharge cycles under d...

Although various investigations of Atkinson cycle have been carried out, distinct output power and thermal efficiencies of the engine have been achieved. In this regard, thermal efficiency, Ecological Coefficient of Performance (ECOP), and Ecological function (ECF) are optimized with the help of NSGA-II method and thermodynamic study.  The Pareto optimal frontier ...

Humidification dehumidification desalination (HDH) is a promising technology for small-scale water production applications. There are several embodiments of this technology which have been investigated by researchers around the world. However, from a previous literature review [1], we have found no study which carried out a detailed thermodynamic analysis in order to improve and/or optimize the...

Large changes in hysteresis are reported as a function of applied stress under thermal cycling experiments in NiTi single crystals. In the low Ni alloy the thermal hysteresis expanded with increasing stress while in the high Ni alloy the thermal hysteresis contracted with increasing stress. The results in both cases meet the limit obtained from Differential Scanning Calorimetry at zero stress. ...

The high temperature magnetic and structural properties of an amphiphilic iron(III) spin crossover complex are reported. Thermal cycling reveals a scan rate-dependent 20 K thermal hysteresis in the mT vs T data close to room temperature. A fast scan rate is essential for the hysteresis but it is robust and reproducible after multiple thermal cycles. Differential scanning calorimetry and cross ...

The purpose of the present investigation was to determine the feasibility of using lysolipid-based thermal sensitive liposomes (145nm) for high molecular weight molecule delivery. Fluorescein isothiocyanate conjugate-albumin was used as a model drug (MW 66kDa). Thermal sensitive liposomes, which encapsulated the protein were prepared using a passive encapsulation methodology involving freeze-th...

Photon absorbers, masks, and shutters of the third-generation light sources are subjected to intense thermal stress cycles from the high intensity x-ray beams. A collaborative research study is underway at APS and ESRF to establish thermal fatigue design criteria for Glidcop® Al-15, which is commonly used for high-heat-load components. A nonlinear finite element methodology is used for modeling...

Short cracks, extending to the interdiffusion zone, have been observed in platinum-modified nickel-aluminide diffusion coatings on single-crystal CMSX-4 superalloys after these have been subject to short (10 min) rapid thermal cycles. The cracks were revealed after removing the thermally grown oxide formed during cycling on the coating surfaces. Cracking was observed for coatings subject to the...

BACKGROUND Despite considerable advances, DNA sequencing has remained somewhat time-consuming and expensive, requiring three separate steps to generate sequencing products from a template: amplification of the target sequence; purification of the amplified product; and a sequencing reaction. Our aim was to develop a method to routinely combine PCR amplification and cycle sequencing into one sin...