Epoxy ternary systems were prepared from the diglycidylether of bisphenol-A (DGEBA), epoxidized castor oil (ECO), and nano-CaCO3 using a thermally latent initiator. The effects of ECO and the nano-CaCO3 contents on the thermal stability and mechanical interfacial properties of the prepared DGEBA/ECO/nano-CaCO3 ternary systems were examined by thermogravimetric analysis (TGA), Izod impact tests,...

Using electrospinning technique, well-aligned poly(azo-ether-imide) (PAEI) nano-fibers and PAEI/multiwalled carbon nanotube (MWCNT) nano-fibers were developed in this effort. Afterwards, polystyrene-b-poly (ethylene-ran-butylene)-b-polystyrene (SEBS) and polyimide-based nano-fiber films were casted. The as-prepared electrospun nanofibers acted as homogeneous reinforcement to enhance the tensile...

composite solid propellants were prepared with and without nano-alloys (ti-co, ti-ni, ti-zn), where nano-alloys used as catalyst. these nano-alloys are prepared by hydrazine reduction method. catalytic properties of these nanomaterials were measured on ammonium perchorate/hydroxyterminatedpolybutadiene propellant by thermogravimetery analysis and differential thermal analysis. both experimental...

In this study, carbon nano-micro spheres with tightly controllable size, regular and perfect shape, high yields and narrow size distribution were prepared simply from glucose and DI water as precursors using a hydrothermal method. By setting the initial concentration of glucose solution and changing the hydrothermal process time at a constant temperature of 160 °C, carbon spheres with various s...

Illite-smectite clay is a new mixed mineral of illite and montmorillonite. The ability of nano illite/smectite clay to remove Pb(II) from slightly polluted aqueous solutions has been investigated. The effects of pH, contact time, initial concentration of Pb(II), nano illite/smectite clay dosage, and temperature on the adsorption process were studied. The nano illite/smectite clay was characteri...

The sol-gel method was used to prepare SiO(2) thin films co-doped with In(2)O(3) nano-particles and Eu(3+). The formation of nano-sized In(2)O(3) particles after annealing at 900 °C was confirmed by the x-ray diffraction technique. A novel phase transition from a hexagonal rhombic centered to a body centered cubic structure of In(2)O(3) nano-particles was observed at around 1100 °C. It is found...

This paper presents the findings of a study on adsorption of dichlorodiphenythreechloroethen (DDT) and polychlorinated biphenyls (PCBs) on three nanomaterials including Multi walled Carbon Nanotube (MWNT), nano-clay and nano-alumina. DDT and PCBs are of significant concern due their high toxicity and long environmental half-lives. Experiments were conducted using batch adsorption procedures at ...

We consider surface-induced ratcheting transport of particles in nano-channels, particularly at room temperature. show that temperature it is possible to achieve about 10 nm size a nano-channel 100 width. The typical velocity such case could be the order few hundred nano-meter when surface undulations are wavelength and amplitude tens nano-meter. At temperature, viscosity fluid enabling nano-ch...

In this work, we have developed a thermal sensor based on poly(3,4 ethylenedioxythiophene) (PEDOT) nano lms as thermoelectric material. The PEDOT nano lms have been synthesized by the electrochemical polymerization method. The thicknesses of the lms were around 120 nm. The doping level of PEDOT was controlled by chemical reduction using hydrazine. The achieved Seebeck coefficient is 40 μV/K. A ...