The common commercial charge coupled device (CCD) camera is combined with a composite light filter to form a vision sensing system of low cost. It can capture the whole image of a weld pool clearly during constant-current gas tungsten arc welding (GTAW). Based on the imageprocessing algorithm, the edges of the weld pool under different welding conditions can be extracted. Calibration is made to...

Laser-based ultrasonic (LBU) measurement shows great promise for on-line monitoring of weld quality in tailor-welded blanks. Tailor-welded blanks are steel blanks made from plates of differing thickness and/or properties butt-welded together; they are used in automobile manufacturing to produce body, frame, and closure panels. LBU uses a pulsed laser to generate the ultrasound and a continuous ...

Selecting a process for welding large scale equipment on site demands special expertise due to the numerous variables be considered. This paper is aims applying decision support methodology selection of 16000 cubic meter storage tank welded site. Five processes are chosen select from, namely, Gas Metal Arc Welding (GMAW), Shielded (SMAW), Submerged (SAW), Flux Cord (FCAW) and Tungsten (GTAW). T...

Monitoring systems for the laser keyhole welding process of aluminium Tailor Welded Blanks, are in many cases vital to ensure a certain weld quality. Especially process visualization with camera based systems gives a lot of insight. Although for steel it has already been demonstrated that images can be obtained in real-time from the laser welding process using these cameras based on silicon chi...

The probable reasons for evolution of weld porosity and solidification cracking and the structure- property relationship in aluminium welds were investigated. Aluminium plates (1xxx series) were welded by Tungsten Inert Gas (TIG) welding process, 5356 filler metal was used and heat input was controlled by varying welding current (145A, 175A and 195A). The welded samples were examined under opti...

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for ...

The various welding parameters such as welding speed, voltage and gas flow rate were varied on HSLA steel and the effects of these parameters on weld bead geometry such as penetration, width & height have been studied. Mathematical equations have been developed using factorial technique. And the result of various effects are shown in tables. (Numerical Values). INTRODUCTION Wide variety of stee...

To assess the exposure of welders to thorium-232 (232Th) during tungsten inert gas arc (TIG) welding, airborne concentrations of 232Th in the breathing zone of the welder and background levels were measured. The radioactive concentrations were 1.11 x 10(-2) Bq/m3 during TIG welding of aluminum (TIG/Al), 1.78 x 10(-4) Bq/m3 during TIG welding of stainless steel (TIG/SS), and 1.93 x 10(-1) Bq/m3 ...

This paper analyses the arc interference in an a.c. combined (both the pilot arc and the plasma arc exist in the welding process) plasma arc welding of aluminium alloys. This phenomenon results in an unstable welding process and weld formation. To maintain the pilot arc during the period when the electrode is positive, a cathode region must be formed in front of the tungsten electrode tip. Howe...