In this study, two different vegetable based cutting fluids developed from refined canola and sunflower oil and a commercial type semi-synthetic cutting fluid were carried out to determine optimum conditions for tool wear and forces during milling of AISI 304 austenitic stainless steel. Taguchi L9 (3) orthogonal array was used for the experiment plan. Cutting speed, feed rate, depth of cut and ...

The Taguchi method was applied as an experimental design to determine optimum conditions for colour removal from azo dyes solutions containing remazol yellow G by electrocoagulation (EC) using iron and steel electrodes as anode and cathode, respectively. An orthogonal array (OA9) experimental design that allows to investigation the simultaneous variations of four parameters (initial remazol ye...

In this paper, Taguchi method was applied to determine the optimum conditions for Zn (II) removal from aqueous solution by halloysite nanotubes (HNTs). An orthogonal array experimental design (L16 (45) which is of five control factors including pH, t (contact time), m (adsorbent mass), T (temperature) and C0 (initial concentration of Zn (II)) having four levels ...

The effect of squeeze casting process parameters on wear behavior of AC2A aluminium alloy was primarily investigated in this experimental study. Five process parameters, namely squeeze pressure, pouring temperature, die temperature, die material and compression time, each at four levels were chosen and sixteen experimental runs based on L16 orthogonal array were performed. From analysis of vari...

cationic copolymer gels of acrylamide and [(methacrylamido) propyl] trimethyl ammonium chloride (maptac) were synthesized by free radical aqueous solution polymerization. the taguchi method, a robust experimental design, was employed for the optimization of the synthesis based on the equilibrium swelling capacity of the hydrogels. based on taguchi method a standard l16 orthogonal array with fiv...

Taguchi optimization method (L32 orthogonal array) was applied as an experimental design to determine optimum conditions for methylene blue dye removal from aqueous solutions by electrocoagulation (EC). Various electrocoagualtion parameters such as initial pH, time of electrolysis, concentration of dye, electrodes gap, applied current, solution temperature, amount of supporting electrolyte, des...

Corresponding Author: Siew Mooi Lim Faculty of Computer Science and Information Technology, Universiti Putra Malaysia, Malaysia E-mail: [email protected] Abstract: This study operates within experimental design with two main tools of Taguchi method namely orthogonal array and signal to noise ratio to discover the optimal parameter settings for newly proposed generational genetic algorithms; the...

The present investigation deals with the study and development of a surface roughness prediction model for the machining of unidirectional glass fiber reinforced plastics (UDGFRP) composite using Artificial Neural Network (ANN). The feed forward back propagation is used. Taguchi method (Orthogonal L16 array) is employed to carry out the experimental work. The process parameters selected for stu...

The optimized cutting parameters are very important to control the required surface quality. In the present study, Taguchi method is used to find the optimal cutting parameters for surface roughness (Ra) in turning. The L-18 orthogonal array, the signal-to-noise ratio & analysis of variance are employed to study the performance characteristics in turning operations of AISI-410 steel bars using ...