The Zn-Ni-TiO2 composite coatings were developed on mild steel by electrodeposition method. The bath constituents (ZnSO4.6H2O, NiSO4.6H2O, TiO2, thiamine hydrochloride) and operating conditions (temperature and pH) were optimized by Hull cell method, for peak performance of the coating against corrosion. The coatings were prepare...

OBJECTIVES The present study was conducted to evaluate the optimal method of enhancing the bond strength of a composite resin to the facial surface of the primary anterior stainless steel crowns using various surface treatments namely Nd: YAG laser surface treatment, sandblasting , alloy primer application and no surface treatment. STUDY DESIGN The study sample consisted of 60 primary anterio...

OBJECTIVE The aim of this study was to evaluate the effect of multiple layers of an infection control barrier on the micro-hardness of a composite resin. MATERIAL AND METHODS One, two, four, and eight layers of an infection control barrier were used to cover the light guides of a high-power light emitting diode (LeD) light curing unit (LCU) and a low-power halogen LCU. The composite specimens...

background: titanium (ti) implants are commonly coated with hydroxyapatite (ha). however, ha has some disadvantages such as brittleness, low tensile strength and fracture toughness. it is desirable to combine the excellent mechanical properties of zro2 and the chemical inertness of al2o3 with respect to the purpose of this project which was coating ti implants with ha-zro2-al2o3 to modify the s...

Surface modification on Mg alloys is highly promising for their application in the field of bone repair. In this study, a new metal-organic framework/MgF₂ (Mg-MOF-74/MgF₂) composite coating was prepared on the surface of AZ31B Mg alloy via pre-treatment of hydrofluoric acid and in situ hydrothermal synthesis methods. The surface topography of the composite coating is compact and homogeneous, an...

We report on the laser ablation of composite prismatic structures using a vacuum ultraviolet (VUV) 157 nm F2 laser. Polycarbonate and CR-39 substrates have been intentionally seeded with silver wires and silicon carbide whiskers respectively. The seed particles remain attached to the underlying substrate after laser ablation, forming composite silver-polycarbonate and silicon carbide-CR-39 inte...

statement of the problem addition of metallic nano-particles to composite resins can change their water contact angle purpose the aim of this study was to evaluate the effect of addition of nano-particles of silver and zinc oxide to composite resins on their water contact angle materials and methods this in vitro study was performed on 60 composite resin samples. nano-silver and nano-zinc oxide...

The aim of this study was to compare the roughness of the surface of one nanofill (Filtek Supreme XT 3M Espe, St. Paul, USA) and one silorane (Filtek Silorane, 3M Espe, St. Paul, USA) composite after polishing. Five specimens of each composite were polymerized under a polyester strip for 40 seconds. After curing four probes were polished with different Sof-Lex discs and one probe with Pogo for ...

INTRODUCTION The aim of this study was to evaluate the composite surface treated by different powers of Erbium-Doped Yttrium Aluminum Garnet (Er:YAG) laser in comparison with bur preparation via scanning electron microscope. METHODS Fourteen composite resin blocks with 15× 10 × 10 mm dimensions were used in this study. The samples were divided to seven groups as follow: Group 1 (power: 1 W, E...

An experimental study is conducted to determine the nucleate pool boiling heat transfer performance of a copper-graphite (Cu-Gr) composite surface in Freon 113. The composite medium consists of ultra-high thermal conductivity graphite fibers of 0.0008~.010 mm diameter being consolidated in a copper matrix (50% area fraction). It has high thermal conductivity along the fiber directions, several ...