Steel corrosion resulting from the penetration of chloride ions or carbon dioxide is a major cause of degradation for reinforced concrete structures,. The objective of the present investigation was to develop a low-cost sensor for steel corrosion, which is based on a very simple physical principle. The flat end of a cut optical fiber is coated with an iron thin film using the ion sputtering tec...

Cementitious matrices are the fragile materials that possess a low tensile strength. The addition of fibers randomly distributed in these matrices improves their resistance to cracking, substantially. However, the incorporation of fibers into a plain concrete disrupts the granular skeleton and quickly causes problems of mixing as a result of the loss of mixture workability that will be translat...

this paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (cfrp) plates to tension face of the beam. three groups of beamswere tested analytically and compared with existing experimental results. results of the numericalanalyses showed that, although addi...

While significant advances have been made in concrete materials and in concrete structures over the last decade, research in materials and in structural engineering are often carried out separately. As a result, opportunities in major leaps in structural performance may be missed, or research emphasis in materials development may be misguided. This paper introduces the concept of integrated str...

This paper describes sixteen fire tests conducted on slender circular hollow section columns filled with normal and high strength concrete, subjected to concentric axial loads. The test parameters were the nominal strength of concrete (30 and 80 MPa), the infilling type (plain concrete, reinforced concrete and steel fiber reinforced concrete) and the axial load level (20% and 40%). The columns ...

Dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. These walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. In this research intermediate dual system of steel moment frame was chosen with int...

Ductile fiber-reinforced cement-based composites (DFRCCs) are being investigated for new design as well as retrofitting of structures in seismic regions. DFRCC is highly ductile and is characterized by strain-hardening in tension to strains over 3% and by unique cyclic loading behavior. To accurately predict the structural performance of DFRCC components under cyclic and seismic loading, a robu...

This Investigation aims to study the effect of adding Steel fibers with different volume fractions Vf (o.5, 0.75, and 1% by concrete) aspect ratio 100 on mechanical properties concrete, alsofinding influence petroleum products (Kerosene Diesel) Fiber Reinforced Concrete (SFRC).The experimental work consists two groups: group one specimens (cubes prisms) plain concrete reinforced steel fiber exp...

Abstract: Despite having a number of advantages, reinforced concrete can suffer rebar corrosion in high–chloride media, resulting in failure of reinforced concrete structures. In this research the corrosion inhibition capability of the mixture of calcium and ammonium nitrate of steel rebar corrosion was investigated in the simulated concrete pore solution. Cyclic polarization and Electroche...

frps (fiber reinforced polymer) possess many favorable characteristics suitable and applicable for construction industry when compared with steel reinforcement. there are new ideas to use frps as longitudinal or transverse reinforcement for new concrete elements particularly for bridge decks or beams. although high tensile strength of frp is main characteristic for applications at both areas, i...