This study was carried out to test the ability of a mixture of sand, cement and clay for immobilizing cadmium ions from leaching out into water resources. Various samples with different mass ratios for this mixture were tested to determine their efficiency for adsorbing cadmium. The compressive test, cation exchange capacity (CEC), adsorption equilibrium and leaching test were applied to each s...

A preliminary survey of an arsenic contaminated site from an abandoned copper smelting facility and feasibility study of using solidification/stabilization (S/S) process to treat the contaminant waste were undertaken. It was found that the waste, located in the three-flue gas discharge tunnels, contained 2-40% arsenic. The pH of the contaminated waste is extremely low (ranging from 1.8 to 3.6)....

Current research emphasis is more on the utilization of materials that are considered as waste. Tailings and fly ash are major category of industrial wastes, whose disposal is problematic from environmental point of view. In this present research, Industrial byproducts, namely, lime (CaO) and class F type fly ash have been used as candidate materials along with the partial addition of ordinary ...

Two polymeric resins, Polymal and Hetron, were evaluated to solidify/stabilize (S/S) for ultimate disposal brake lining dust containing asbestos. This dust was generated as part of a sequence of processing steps in the manufacture of automobile brake linings. The mean grain size of the lining dust for disposal was 298.2 m m, the range being from 24.9 to 567.3 m m. Based on the Toxicity Characte...

Solidification rate of the casting affects greatly on the microstructure, quality as well as the mechanical properties of the casting. In centrifugal castings solidification rate is faster compared to gravity casting but still solidification depends on various process parameters like, die wall temperature, pouring temperature of the molten metal, wall thickness of the die and also rotational sp...