in hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. in this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. specimens of low carbon silicon-free steel with d...

In our contribution we present the fabrication of Si1−xGex alloy by ion-implantation and millisecond ash lamp annealing. The 100 keV Ge ions at the uence of 10 × 10, 5 × 10, and 3 × 10 cm−2 were implanted into monocrystalline (100)-oriented Si wafers covered by 50 nm thermal oxide. In the consequence, the 50 nm amorphous Ge rich Si layers were obtained. The recrystallization of the implanted la...

In this work, the evolution of microstructure and the thermo-mechanical behavior of co pper and dilute copper alloy thin films was investigated. 0.3 to 2.0 μm thick film s were deposited by magnetron sputtering under ultra high vacuum conditions onto diffusion-barrier coated silicon substrates and subjected to wafer curvature measurements. Pure copper films annealed in ultra high vacuum exhibit...

The development of high damping materials for noise reduction and attenuation of vibration on structural applications, such as automotive and aerospace industries, has been investigated. This experimental study is concerned with the damping capacity (tan delta) and dynamic Young’s modulus (|E*|) of Silicon carbide (SiC) reinforced aluminium (Al) matrix composite. AlSi-SiCp composite was produce...

This paper presents K-band-stepped, double-ridged square horn antennas fabricated by metallic 3D printing technology in copper (85% copper and 15% stannum) and aluminum alloy (89.5% aluminum, 10% silicon, and 0.5% magnesium). Compared with the popular dielectric 3D-printed horn antenna, the metallic counterpart features better mechanical robustness in terms of material. Moreover, the metallic h...

Particle size is widely used to tune the electronic, optical, and catalytic properties of semiconductor nanocrystals. This contrasts with bulk semiconductors, where properties are tuned based on composition, either through doping or through band gap engineering of alloys. Ideally, one would like to control both size and composition of semiconductor nanocrystals. Here, we demonstrate production ...

[1] The efficiency of heat transfer by conduction in the Earth’s core controls the dynamics of convection and limits the power available for the geodynamo. We have measured the room temperature electrical resistivity of iron and iron-silicon alloy to 60GPa and present a new model of the resistivity at high pressures and temperatures relevant to the Earth’s core. The model is compared with avail...

The design of chemical compositions containing potent nuclei for the enhancement of heterogeneous nucleation in aluminium, especially cast alloys such as Al-Si alloys, is a matter of importance in order to achieve homogeneous properties in castings with complex geometries. We identified that Al3Nb/NbB2 compounds are effective heterogeneous nuclei and are successfully produced in the form of Al-...