Abbreviations a 1 , a 2 , a 3 , a 4 and A 1 , A 2 , A 3 , A 4 Constants in the shape function y(x) a C Contact radius α Wave number of the flexural waves A Cross-section area of the cantilever b Thickness of the cantilever c P Ratio φ Lat /φ d Y 0 , d X0 Normalized amplitude of the sensor tip in y-and x-direction, respectively δ n , δ L Normal, lateral contact deflection (in the coordinate syst...

Structural acrylic adhesives have been attracted special interest because theses can be cured at room temperature and bonded to oily substrates. To use adhesively joints more widely for structural use, it is necessary clarify fatigue crack propagation characteristics. In this study, growth rate was measured using unidirectional woven CFRP/aluminum double cantilever beam (DCB) with an adhesive. ...

Microcantilevers were first introduced as imaging probes in Atomic Force Microscopy (AFM) due to their extremely high sensitivity in measuring surface forces. The versatility of these probes, however, allows the sensing and measurement of a host of mechanical properties of various materials. Sensor parameters such as resonance frequency, quality factor, amplitude of vibration and bending due to...

The power generation capacity of piezoelectric energy harvesters (PEHs) is not only related to the properties of the piezoelectric material, the vibration magnitude and the subsequent conditioning circuit, but also to the fixation modes and adjustment methods. In this paper, a commercial piezoelectric ceramic plate (PCP) in simply supported beam fixation mode and cantilever beam fixation mode w...

A gap with variable geometry is presented for both cantilever beam and fixed-fixed beam actuators as a method to reduce the pull-in voltage while maintaining a required displacement. The method is applicable to beams oriented either in a plane parallel to or perpendicular to a substrate, but is most suitable for vertically oriented (lateral) beams fabricated with a high aspect ratio process whe...

a relationship based on the modified couple stress theory is developed to investigate the flexural sensitivity of an atomic force microscope (afm) with assembled cantilever probe (acp). this acp comprises a horizontal cantilever, two vertical extensions and two tips located at the free ends of the extensions which form a caliper. an approximate solution to the flexural vibration problem is obta...

Aluminum alloy components typically have structural characteristics such as large size and complex shape, making the in situ non-destructive detection of internal residual stress these structures a challenge that manufacturing sector has tried to solve. Ultrasonic longitudinal critically refracted (LCR) waves shown good sensitivity normal horizontal direction could be used detect distribution c...

the pseudo-elastic behavior of shape memory alloy (sma) truss and cantilever beam are investigated. brinson’s one-dimensional material model, which uses the twinned and detwinned martensite fractions separately as internal variables, is applied in the algorithm to establish the sma stress-strain characteristics. this material model also incorporates different young’s modulus for austenitic and ...

Magnetic microactuation systems of torsion silicon cantilever is described. Devices are constructed in a batch fabrication process which combines electroplating with conventional photolithography , materials, and equipment. The magnetic transducers are applied to generation of motion in micromechanical structures such as cantilever, beam, membrane. Microelectromechanical systems (MEMS) with mag...

The reliability of metallic microelectromechanical systems (MEMS) depends on time-dependent deformation such as creep. Key to this process is the interaction between microstructural length scales and dimensional length scales, so-called size-effects. As a first critical step towards studying these size-effects in time-dependent deformation, a purely mechanical experimental methodology has been ...