a Instruments The as-prepared nanostructures on the substrate were sent to characterizations on a CAMSCAN APOLLO 300 field-emission scanning electron microscopy (FE-SEM) at 15KV. The crystal structure of the products was studied using a Bruker D8 X-ray diffractometer with Cu K irradiation at λ = 1.5406 Å. For high-resolution TEM measurements, one drop of the alcohol dispersed suspension of sam...

Nanocrystalline chlorapatites (Ca10(PO4)6Cl2) doped with lanthanide ions (Eu(3+), Er(3+) and Yb(3+)) and co-doped with silver ions (Ag(+)) were synthesized by a hydrothermal synthesis route. XRD, TEM, and SAED measurements indicated that the powders are single phased and crystallize with a hexagonal structure with good dispersion. The results showed well crystallized chlorapatite grains with a ...

High-quality CuInSe2 nanoparticles have been prepared by the solution phase synthesis procedure utilizing copper acetate or cuprous chloride as the Cu-precursor, indium chloride as the In-precursor and selenium powder as Se precursor, respectively. The synthesis process was optimized to grow 20 to 150 nm sized nanostructures of CuInSe2, and the Cu to In ratio as well as the kind of Cu-precursor...

We report the first photoluminescence (PL) characterization of InAs nanowires (NWs). The InAs NWs were grown on GaAs(111) B and Si(111) substrates using the Au-assisted molecular beam epitaxy (MBE) growth technique or metal-organic chemical vapor deposition (MOCVD). We compared the PL response of four samples grown under different conditions using MBE or MOCVD. High-resolution transmission elec...

Single crystalline indium nanowires were prepared on Zn substrate which had been treated in concentrated sulphuric acid by galvanic displacement in the 0.002 mol L-1In2(SO4)3-0.002 mol L-1SeO2-0.02 mol L-1SDS-0.01 mol L-1citric acid aqueous solution. The typical diameter of indium nanowires is 30 nm and most of the nanowires are over 30 μm in length. XRD, HRTEM, SAED and structural simulation c...

The nature of Ni-hydroxide precipitates on pyrophyllite were reexamined by analytical electron microscopy (AEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction (SAED), powder X-ray diffraction (PXRD), and extended X-ray absorption fine structure (EXAFS) spectroscopy. Chemical analysis of precipitates showed that the precipitate contains about 20% Al...

The complexes, [Cu{EC(5)H(3)(R-3)N}](4) (E/R = Se/Me or Te/R; R = H or Me) were isolated by the reaction between CuCl and NaEC(5)H(3)(R-3)N and were characterized by elemental analyses, uv-vis and NMR ((1)H, (13)C) spectroscopy. The crystal structures of [Cu{SeC(5)H(3)(Me-3)N}](4) and [Cu(TeC(5)H(4)N)](4) revealed that the molecules are tetrameric in which each copper atom lies at the vertex of...

Metal-semiconductor Janus-like nanoparticles with the composition tantalum silicide-silicon (TaSi₂/Si) were synthesized for the first time by means of an evaporation method utilizing a high-power electron beam. The composition of the synthesized particles were characterized using high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), selective area electron diffracti...

Three-dimensional (3D) flower-like hierarchical beta-Ni(OH)(2) hollow architectures were synthesized by a facile hydrothermal route. The as-obtained products were well characterized by XRD, SEM, TEM (HRTEM), SAED, and DSC-TGA. It was shown that the 3D flower-like hierarchical beta-Ni(OH)(2) hollow architectures with a diameter of several micrometers are assembled from nanosheets with a thicknes...

In this work, the photokilling of Escherichia coli using a “one-pot” synthesized suspension of anatase crystallized nanoparticles is evaluated. Preliminary to the biological tests concerning the antibacterial efficiency, the fabricated suspension, using a derived sol-gel process in soft chemistry condition, is characterized. Structural properties of the nanoparticles are investigated using Elec...