A group of stainless steel arc welding processes was compared for emission rates of fume and hexavalent chromium, and costs per meter length of weld. The objective was to identify those with minimal emissions and also compare relative labor and consumables costs. The selection included flux-cored arc welding (FCAW), shielded-metal arc welding (SMAW), and multiple gas metal arc welding (GMAW) pr...

Gas tungsten arc welding is the primary process for precision joining. To develop a control system for this process, a novel sensor is proposed to measure the depth of the weld pool surface using a non-transferred arc. A flat surface is periodically established to provide a real-time reference. The main-arc-on period is selected as the system’s input. Because of possible large variations/ranges...

This paper presents a study on optimization of process parameters using particle swarm optimization to minimize angular distortion in 202 grade stainless steel gas tungsten arc welded plates. Angular distortion is a major problem and most pronounced among different types of distortion in butt welded plates. The process control parameters chosen for the study are welding gun angle, welding speed...

Abstract An analytical method for determination of a stress condition butt welded thin-gauge plates with asymmetrical reinforcement is developed. The proposed allows take into account the effect load application eccentricity on tensile concentration factor (SCF) in weld root zone. It presented that bending stresses, caused by this eccentricity, result increasing total stresses up to 75%. result...

FSW material flow and phase transformation were studied at the interface of dissimilar welding of Al 6013 to Mg. Defect free butt weld was obtained when aluminum and magnesium test plates were placed in the advancing side and retreating side respectively, and the tool was placed 1 mm off the weld centerline into the aluminum side. In order to understand how the materials flow during FSW, steel ...

Over the last decade attempts have been made to fabricate aluminum matrix composites (AMCs) reinforced with several ceramic particles. Aluminum reinforced with ZrB2 particles is one such AMC. The successful application of new kind of AMCs lies in the development of secondary processes such as machining and joining. Friction stir welding (FSW) is a relatively new solid state welding which overco...

In this research work, investigations are carried out on Continuous Wave (CW) Nd:YAG laser welding system after preliminary experimentation to understand the influencing parameters associated with laser welding of AISI 304. The experimental procedure involves a series of laser welding trials on AISI 304 stainless steel sheets with various combinations of process parameters like beam power, beam...

Butt welding of austenitic stainless steel 304 plates was carried out using an electron beam. Experiments were conducted for various combinations of input process parameters determined according to central composite design. Three input parameters, namely accelerating voltage, beam current, and welding speed were considered during the experiments. The weld-bead parameters, namely bead width and ...