Nano fabricated amplifier for semiconductor epitaxial laser A major challenge for building a widely tunable external cavity Mid-Infrared (MIR) laser using latest semiconductor epitaxial (epi) laser is to apply the Anti-Reflection (AR) coating that could turn the otherwise Fabry-Perot (FP) epi laser waveguide into an amplifier. As the epi laser waveguide are progressing rapidly in terms of tunin...

We report on the fabrication, the characterization, and the optical simulation of a gold-silica nanocomposite and present its integration into a broadband anti-reflective coating (ARC) for a silicon substrate. The two-layer ARC consists of a nanocomposite (randomly distributed gold cluster in a silica matrix) and a pure silica film. We capitalize on the large refractive index of the composite t...

Residual stress in optical thin film coatings can cause adhesion failures, cracking, buckling, and bending of the substrates. The stress in the coating depends on the materials used, deposition process, and the design. The bulk properties of the coating materials and the substrate such as thermal coefficient of expansion, Young’s Modulus, Poisson’s Ratio, etc., are basic parameters to be consid...

The fully-leaky guided wave technique has been used to study the reflective 90 ̊ MTN liquid crystal cell used for LCOS. The cell is comprised of upper substrate with indium-tin-oxide coating and lower substrate with aluminum coating. Reflective angle-dependent signals (Rss, Rpp, Rsp and Rps) were recorded over a range of angles of incidence with the cell under application of 0 7 Vrms ac electric...

An ultra-low anti-reflection optical coating on both surfaces of a plastic cover slip was studied for use in confocal image measurement. The optical reflectance at a wavelength of 632.8 nm was less than 0.1% when the coated sample was placed in a liquid having a refractive index of 1.34 close to the aqueous solution of the biomaterial. The highand low-index coating films, Substance-2 (PrTiO3) a...

We report here several different superlattice photonic crystal based designs for 200nm thick c-Si solar cells, demonstrating that these structures have the ability to increase broadband absorption from λ = 300nm to 1100nm by more than 100% compared to a planar cell with an optimized anti-reflection coating. We show that adding superlattices into photonic crystals introduces new optical modes th...

Terahertz time-domain spectroscopy (THz-TDS) is able to extract optical or dielectric properties of materials, whether in the solid, liquid, or gas phase, in the T-ray frequency region. Spectroscopy of a liquid or gas often requires a receptacle to confine the sample. In order to allow T-rays to probe the sample effectively, the receptacle must have T-ray transparent windows. However, even thou...

Oblique-angle deposited titanium dioxide (TiO(2)) nanorods have attracted much attention as good antireflection (AR) coating material due to their low n profile. Therefore, it is necessary to better understand the optical properties of these nanorods. TiO(2) nanorods grown on glass and Si substrates were characterized in the visible (0.4-0.8 μm) and infrared (2-12 μm) regions to extract their c...

Today multiand monocrystaline solar cells are typically wet-chemically textured and coated with a thin layer of silicon nitride to reduce losses due to light reflection and for electrical passivation of the silicon surface. In this paper we investigate a layer stack consisting of silicon nitride (SiNx:H) with a high refractive index at the silicon interface, an intermediate SiNx:H layer and on ...

Damascene approaches are widely used for creating microelectronic interconnects. Successful implementation of the process is reliant upon the deposition of a refractory metal or metal nitride liner coating. It functions as a diffusion barrier layer to suppress transport of subsequently deposited interconnect metals into the surrounding dielectric. The development of vapor-phase processes for th...