The corrosion inhibition properties of the benzothiazole BTH and benzotriazole BT inhibitors on the aluminum in 0.25 M HCl solution were studied. Electrochemical impedance spectroscopy EIS, electrochemical noise EN and potentiodynamic polarization techniques were used to investigate the inhibition properties of the inhibitors. Scanning electron microscope SEM was also utilized in order to inves...

The adsorption and corrosion inhibiting effect of branched polymers (BATP, BAAZ, BETP & BEAZ) on mild steel in 1M H2SO4 at 30±1°C was investigated using gravimetric, electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization techniques. The experimental findings revealed that BATP inhibited the corrosion reaction in the acid environment to greater extend compared to BAAZ, BE...

Corrosion behavior of Ni20Cr coatings deposited by HVOF (high velocity oxygen-fuel) process was evaluated in ZnCl2-KCl (1 : 1 mole ratio) molten salts. Electrochemical techniques employed were potentiodynamic polarization curves, open circuit potential, and linear polarization resistance (LPR) measurements. Experimental conditions included static air and temperatures of 350, 400, and 450°C. 304...

Automobile production plants have advanced the utilization of stainless steel alloys for exhaust mufflers due to corrosion failures associated with their operating lifespan and conditions application. Corrosion vulnerability as received heat treated (500oC 1000oC) 439 L ferritic in 3.5 M H2SO4 electrolyte at 0% 6% NaCl concentration was evaluated potentiodynamic polarization, potentiostatic mea...

The localized corrosion behavior of laser surface melted 304L austenitic stainless steel was studied by potentiodynamic polarization test. The extent of improvement in corrosion resistance was governed by the preferred orientation and the percentage of delta ferrite present on the surface of the laser melted sample. It was established by orientation imaging microscopy that the highest pitting p...

Pure cobalt coatings were electrodeposited on copper substrate by means of direct electric current in a chloride solution at different current densities in the range of 10-70 mA cm -2 . The surface morphology and microstructure were investigated via X-ray diffraction analysis and scanning electron microscopy. Corrosion behavior of cobalt coatings was also studied in a 3.5 wt% NaCl soluti...

Potentiodynamic, impedance measurements were carried out on 304 stainless steel in 0.5N, 1.0, 2.0 and 5.0 N H2SO4 solutions. X-ray photoelectron spectroscopic [XPS] studies carried out on 304 stainless steel in H2SO4 solutions revealed the existence of CrOOH, Cr2O3, -Fe2O3, FeOOH, Mn2O3, Mn3O4, MnS, Ni (OH)2, Ni2O3, NiO, sulphides. The passive film found to contain chromium oxide inner layer an...

Ti-6Al-4V alloy is the most commonly used alloy for dental and orthopedic implants. In order to improve osseointegration, different surface modification methods are usually employed, including self-assembled monolayers (SAMs). This study presents an investigation of both active (electroassisted) and passive (adsorption) approaches for the modification of Ti-6Al-4V using alkylphosphonic acid. Th...