The porosity in carbonaceous materials affects many of their properties. For this reason, the characterization of this porosity is very important. Many diverse techniques have been utilized to characterize the pores in carbon materials. Some of these techniques along with the use of X-ray microcomputed tomography (μCT) have been utilized in this study to provide significant insight into the por...

Numerical simulation of tracer testing data is conducted based on hydrogeology parameters inferred from pressure interference data. By incorporating both of pressure interferences and tracer testing data, pertinent values of average fracture spacing and rock-matrix permeability can be estimated. Relatively good match of tracer return curves are obtained. It is necessary to assign very small fra...

Porous hydroxyapatite spheres were prepared by a modified gelcasting method producing a ceramic prosthesis with controled porosity. The spheres are approximately 2.2 cm in diameter with a relatively homogeneous pore size distribution from 10 to 40 microm in diameter. The samples were characterized by X-ray powder diffractometry (XRD) and Fourier transform infra-red spectroscopy (FTIR) to identi...

Characterisation of the pore space in carbonate reservoirs and aquifers is of utmost importance in a number of applications such as enhanced oil recovery, geological carbon storage and contaminant transport. We present a new experimental methodology that uses high-salinity contrast brine and differential imaging acquired by X-ray tomography to non-invasively obtain three-dimensional spatially r...

Nutrient concentration profiles are affected by the mass transport outside the biofilm, inside the biofilm, and by the structure of the biofilm. To understand the distribution of biofilm activity, it is necessary to correlate the local nutrient concentration, local mass transport in the biofilm and the biofilm structure. The correlations among surface averaged dissolved oxygen concentration, su...

3D printing is a promising method for the fabrication of scaffolds in the field of bone tissue engineering. To date, the mechanical strength of 3D printed ceramic scaffolds is not sufficient for a variety of applications in the reconstructive surgery. Mechanical strength is directly in relation with the porosity of the 3D printed scaffolds. The porosity is directly influenced by particle size a...

Macroporous materials with uniform pore sizes in the range from 50 nm to 10 mm are predicted to have unique and highly useful properties as optical devices, specifically for use as photonic crystals with optical bandgaps. Moreover, the ability to control pore size and uniformity could produce improved filters, membrane supports, catalytic materials, and adsorbents. Nevertheless, until very rece...

bamboo-structured carbon nanotubes are grown on co-mo/mcm-41 catalyst in the temperature range of 873-973 k by thermal chemical vapor deposition of acetylene. this study shows that the purified carbon nanotubes have open tips and the metals of the catalyst are not encapsulated. thus, the bamboo-structure seems to grow from the base. pore size distribution of the product is quite narrow and is i...

in this paper, a non-isothermal two-phase flow in the cathode gas diffusion layer (gdl) of pem fuel cell is modeled. the governing equations including energy, mass and momentum conservation equations are solved by numerical methods. also, the optimal values of the effective parameters such as the electrodes porosity, gas diffusion layer (gdl) thickness and inlet relative humidity are calculated...

T1 NMR Relaxation and Petrophysical Properties Marc Fleury 1 1 IFP Energies Nouvelles NMR relaxation is routinely used in the field of geosciences to give basic petrophysical properties such as porosity, pore size distribution, saturation etc. In this tutorial, we will give the basic principle used in the interpretation of the NMR signal and compare the results with other standard petrophysical...