Polypropylene (PP) compounds with styrene–butadiene rubber residue (SBRr) from the footwear industry were produced, adding styrene-(ethylene–butylene)-styrene (SEBS) as a compatibilizer, 20% and 30% of styrene (St.). The PP/SBRr PP/SBRr/SEBS processed in co-rotating twin-screw extruder injection molded. addition SBRr did not compromise processability, torque melt flow index increased slightly c...

The fracture behaviour of polymers is strongly affected by the addition of rigid particles. Several features of the particles have a decisive influence on the values of the fracture toughness: shape and size, chemical nature, surface nature, concentration by volume, and orientation. Among those of thermoplastic matrix, polypropylene (PP) composites are the most industrially employed for many di...

Radical photo-grafting polymerization constitutes a promising technique for introducing functional groups onto surfaces of polypropylene films. According to their final use, surface grafting should be done without affecting overall mechanical properties. In this work the tensile drawing, fracture and biaxial impact response of biaxially oriented polypropylene commercial films grafted with poly(...

The aim of this study is to evaluate the soft tissue response of the pure and Au-embedded PPg-PEG. PP-g-PEG2000, PP-g-PEG4000, Au-PP-g-PEG2000, and AuPP-g-PEG4000 were obtained via chlorination of polypropylene and polyethylene glycol in the presence of a base with a "grafting onto" technique. Solvent cast films of these four copolymers with PP as a control group were embedded into five differe...

Bio-based wood materials are preferable for composites because of their sustainability, but adequately dispersing fibers in polymers can be difficult and costly. Our approach was to pretreat the with a green solvent system, allowing composite extruded single step, simplifying process, reducing overall cost. This study investigates fibrillation untreated sawdust (W) deep eutectic solvent-treated...

this study investigated the effect, on reactor performance and biomass retention inside the bed, of the material used to make the supports of anaerobic fixed-bed reactors. three inert supports of similar shape but made of three different materials polyvinyl chloride, polypropylene, high-density polyethylene were manufactured and used. all three supports had the same specific surface area but di...

Anomalous surface enhanced Raman scattering (SERS) peaks are identified for liquid sample stored in polypropylene centrifuge tubes (PP tube) for months. We observed the unexpected Raman peaks during experiments for Thiamine Hydrochloride aqueous solution stored in PP tube for two months. In order to identify the contaminants we have performed SERS experiments for de-ionized water (DI water) sto...

The preparation of composites of synthetic and natural polymers represent an interesting option to combine properties; in this manner, polypropylene and chitosan extruded films using a different proportion of components and polypropylene-graft-maleic anhydride (PPgMA) as compatibilizer were prepared. The effect of the content of the biopolymer in the polypropylene (PP) matrix, the addition of c...

The flexural properties of commercial bagasse-filled polyethylene (PE) and polypropylene (PP) composites were determined as a function of strain rate at room temperature. The applied strain rates were 1.5 ×10, 3.75×10, 7.5×10, and 1.5×10 s. The flexural modulus tended to increase linearly for the two types of composites with the logarithm of strain rate. The bending strength of polypropylene co...

This work deals with lignin antioxidant properties in polypropylene. We extracted and characterised 15 lignin samples from various botanical origins (wheat straw and wheat bran) using different processes of extraction and using industrial Kraft lignins fractions (Westaco). These lignins were incorporated in polypropylene (1% weight). We underline the effect of lignin solubility in PP on stabili...