Terahertz imaging has many important potential applications. Due to the failure of Si readout integrated circuits (ROICs) and the thermal mismatch between the photo-detector arrays and the ROICs at temperatures below 40 K, there are big technical challenges to construct terahertz photo-type focal plane arrays. In this work, we report pixel-less photo-type terahertz imagers based on the frequenc...

There are two large groups of solid-state radiation detectors, which dominate the area of ionizing radiation measurements, scintillation detectors and semiconductor diodes. The scintillators detect high-energy radiation through generation of light which is subsequently registered by a photo-detector that converts light into an electrical signal. Semiconductor diodes employ reverse biased p-n ju...

We have recently developed a wide-field photon-counting detector having high-temporal and high-spatial resolutions and capable of high-throughput (the H33D detector). Its design is based on a 25 mm diameter multi-alkali photocathode producing one photo electron per detected photon, which are then multiplied up to 107 times by a 3-microchannel plate stack. The resulting electron cloud is proximi...

A method to reduce the transit time of majority of carriers in photomixers and photo detectors to < 1 ps is proposed. Enhanced optical fields associated with surface plasmon polaritons, coupled with velocity overshoot phenomenon results in net decrease of transit time of carriers. As an example, model calculations demonstrating > 280× (or ∼2800 and 31.8 μW at 1 and 5 THz respectively) improveme...

This paper summarizes experiments using a modelocked laser to produce a fast-rising, low-jitter electrical signal for clocking CMOS circuits. A simple integrating optical-to-electrical conversion scheme using two photodiodes is used to minimize jitter, area and electrical power consumption. This scheme is called receiver-less because there is no receiver to introduce unwanted skew, jitter and e...

Graphene's optical properties in the infrared and terahertz can be tailored and enhanced by patterning graphene into periodic metamaterials with sub-wavelength feature sizes. Here we demonstrate polarization-sensitive and gate-tunable photodetection in graphene nanoribbon arrays. The long-lived hybrid plasmon-phonon modes utilized are coupled excitations of electron density oscillations and sub...

Polarimetric imaging has proved its value in medical diagnostics, bionics, remote sensing, astronomy, and in many other wide fields. Pixel-level solid monolithically integrated polarimetric imaging photo-detectors are the trend for infrared polarimetric imaging devices. For better polarimetric imaging performance the high polarization discriminating detectors are very much critical. Here we dem...

The TAIGA gamma observatory is continuing its deployment at the Tunka valley, close to lake Baikal. new, original detectors, able work under severe conditions of Siberia, were developed increase sensitivity for study gamma-quanta energies about 1 PeV and above. distinguishing feature detectors use wavelength shifting light guides scintillation collection on a photodetector. Several designs coun...

In any quantum communication system, such as a quantum key distribution (QKD) system, data rates are mainly limited by the system clock rate and the various link losses. While the transmission clock rate is limited by the temporal resolution of the single-photon detectors, losses in a fiber-based quantum communication system can be minimized by operating in the near infrared range (NIR), at 131...

a three-step selective photo-ionization for gd155 and gd157 isotopes by pulsed laser wasevaluated numerically. due to large thermal neutron absorption cross sections, these two isotopes innatural gadolinium are good candidates as burnable poison to control reactivity early in the fuel cycleand allow extended fuel burn up. rate equations have been used to calculate the dynamics of the isotopepop...