In this study, two different vegetable based cutting fluids developed from refined canola and sunflower oil and a commercial type semi-synthetic cutting fluid were carried out to determine optimum conditions for tool wear and forces during milling of AISI 304 austenitic stainless steel. Taguchi L9 (3) orthogonal array was used for the experiment plan. Cutting speed, feed rate, depth of cut and ...

Cutting force in broaching process is essential information for quality control, troubleshooting and tool life prediction, yet existing technical bottlenecks prediction acquirement internal spline holes process. Based on the mechanics of orthogonal metal cutting, a numerical model cutting constructed by Johnson–Cook material constitutive law failure taking friction both rake face flank into con...

Original scientific paper The present work aims at obtaining parametric combination to achieve the best surface finish and assess effects of selected process parameters on a laser cut quality for laser cutting. This helps to study the variation in response parameter (Ra value) for various levels of selected process parameters. In the present work mild steel specimen is used and the effect of th...

The utilization of TiB2 particles reinforced aluminum (Al6063) metal matrix composite materials in many different engineering fields has undergone a tremendous increase. Accordingly, the need of accurate machining of composites has increased enormously; an attempt has been made to assess the factors influencing surface roughness and material removal rate on machining the composite. The orthogon...

High speed cutting is advantageous due to the reduced forces and power, increased energy savings, and overall improved productivity for discrete-part metal manufacturing. However, tool edge geometry and combined cutting conditions highly affects the performance of high speed cutting. In this study, mechanics of cutting with curvilinear (round and oval-like) edge preparation tools in the presenc...

The effects of cutting tool coating material and cutting speed on cutting forces and surface roughness were investigated by Taguchi experimental design. Main cutting force, Fz is considered as a criterion. The effects of machining parameters were investigated using Taguchi L18 orthogonal array. Optimal cutting conditions were determined using the signal-to-noise (S/N) ratio which is calculated ...