Mesostructured nickel oxide was formed with nickel sulfate and cationic surfactant cetyltrimethylammonium bromide (CTAB). X-ray diffraction (XRD) peaks at low scattering angles and transmission electron microscopy (TEM) indicated that a mesostructure was formed. However, these XRD patterns disappeared after calcination. The addition of sodium silicate in the precursor solutions produced a mesos...

The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating cha...

A fast and cost-effective technique is applied for fabricating cobalt and nickel nanopillars on aluminium substrates. By applying an electrochemical process, the aluminium oxide barrier layer is removed from the pore bottom tips of nanoporous anodic alumina templates. So, cobalt and nickel nanopillars are fabricated into these templates by DC electrodeposition. The resulting nanostructure remai...

A substantial body of occupational epidemiology data has shown that exposure to mixed soluble and insoluble nickel causes the development of lung and nasal cancer. However, due to coexposure of these populations to soluble and insoluble forms of nickel, and limitations in exposure measurements, the contribution of soluble nickel is difficult to determine. Soluble nickel was negative in an NTP i...

A simple and efficient route to prepare supported nanocrystalline oxides is presented. The synthesis procedure, i.e. in situ autocombustion of a glycine complex, allows the production of nanocrystals in a porous matrix presenting larger pore size. An example of successful formation of 2-5 nm nanocrystals is given for a single oxide (Fe(2)O(3)), a mixed-oxide structure (LaCoO(3) perovskite-type)...

Fabrication of microporous structures for the anode of a thin film solid oxide fuel cell (SOFC(s)) using controlled etching process has led us to increased power density and increased cell robustness. Micropores were etched in the nickel anode by both wet and electrochemical etching processes. The samples etched electrochemically showed incomplete etching of the nickel leaving linked nickel isl...

polyimide/nickel oxide (polyimide/nio) nanocomposite was successfully synthesized by sol gel technique, using pyromellitic dianhydriede (pmda), 4,4-oxydianiline (oda) and n,n-dimethylacetamide (dmac) and 10 wt% nickel titanate nanopowders (nps). fourier transform infrared spectrometry (ftir), x-ray diffraction (xrd), scanning electron microscopy (sem), and vibrating sample magnetometer (vsm) we...