Alumina-reinforced carbon nanofiber nanocomposites were prepared using different routes; powders mixture, colloidal route and sol-gel process followed by spark plasma sintering (SPS). CNFs/xAl2O3 (x=10-50 vol.%) were prepared through nanopowders mixing in a high-energy attrition milling. The main limitations in the preparation of this kind of nanocomposites are related to the difficulty in obta...

Nanocomposite Cr–B–N coatings were deposited from CrB0.2 compound targets by reactive arc evaporation using an Ar/N2 discharge at 500 °C and −20 V substrate bias. Elastic recoil detection (ERDA), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), and selected-area electron diffraction (SAED) were used to study the effect of...

The aim of this in vitro study was to evaluate the effect of silica and aluminosilicate nanocomposite coating of zirconia-based dental ceramic by a sol-gel dip-coating technique on the bond strength of veneering porcelain to the yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) in vitro. Thirty Y-TZP blocks (10 mm ×10 mm ×3 mm) were prepared and were assigned to four experimental groups...

mn doped zno nanocomposite thin film coated on glass by a simple spin-coating method was used to degrade an azo textile dye from aqueous environment. mn doped zno nanocomposite thin film was characterized by means of x-ray diffraction (xrd) and scanning electron microscopy (sem). the photo-reduction activity of photocatalyst was evaluated using an azo textile dye as organic contaminant irradiat...

A novel nanocomposite consisted of nanomaterials as (CuO:NiO) and carbon (fuel ash) were designed to absorb solar energy. Thin films were made via casting and spin coating of the dopants nanocomposite thin films, containing different concentration ratios of CuO:NiO. These thin films are precipitated on a glass and copper substrates. The optical properties of the doped fuel ash films with na...

the supercapacitive behavior of polyaniline/mno2-carbon black (pani/mno2-cb), mno2-cb nanocompositesand cb was studied. mno2-cb made by the in situ direct coating method to deposit mno2 onto cb; then pani coating was coated on it. morphology of the nanocomposite was studied by x-ray diffraction (xrd), fourier transform infrared (ft-ir) spectroscopy and scanning electron microscopy (sem). the el...

Gold-dendrimer nanocomposites were obtained for the first time by a simple colloidal approach based on the use of polyamidoamine dendrimers with succinamic acid terminal groups and dodecanediamine core. Spherical and highly crystalline nanoparticles with dimensions between 3 nm and 60 nm, and size-polydispersity depending on the synthesis conditions, have been generated. The influence of the st...

in this study, tio2 and zno nanofilms were prepared by sol-gel spin-coating method. nanofilms were characterized by x-ray diffraction (xrd), energy dispersive analysis of      x-ray (edx), scanning electron microscopy (sem) and field emission scanning electron microscopy (fe-esm). structural and morphological properties of nanofilms were investigated. the average crystalline size of tio2 and zn...

in this work, a simple and effective way to modify the support surface is developed and a nanostructure ceramic support to facilitate deposition of a defect-free overlying micro and meso (nano) porous membrane is obtained. to achieve high performance nanocomposite membranes, average pore size of outer surface of support was reduced by dip-coating in submicron and nano α-alumina slurries. in thi...

INTRODUCTION Nanocomposite microparticles are intelligent carriers utilised for pulmonary drug delivery. These carriers are composed of drug-encapsulated nanoparticles dispersed in microstructures of polysaccharides. Upon administration, the inhaled microparticles can penetrate and be deposited deeply in the lung due to their adjusted aerodynamic particle size. Subsequently, the nanoparticles a...