A novel method of preparing the macrporous nickel coating was described. The macrporous nickel coating was fabricated by employing nano-silica as the template. The effects of technological conditions and the concentration of the additives on the surface quality of coating were investigated, the nano-silica was characterized transmission electron microscopy (TEM) and laser particle size analyzer...

In this research, the SiC-matrix composite with different amounts of TiC (0, 2.5, 5, 7.5, and 10 wt%) supplemented with additives including 4.3 wt% Al2O3 and 5.7 wt% Y2O3 were utilized to initiate the required liquid phase. The sintering process was performed using pressureless sintering at      1900 °C for 1.5 hours under argon atmosphere. The compos...

In this paper, the main activity was to investigate how different substrates, temperature of sintering and percentage of silver ink containing silver nanoparticles influence on Young’s modulus and hardness of printed silver thin samples. Samples were prepared by low cost ink-jet printing technique using Dimatix Material Printer on polyimide flexible substrate and slide glass. Characterization o...

An alumina–zirconia composite containing 5 mol% zirconia was prepared by following a wet interaction process in aqueous medium via the sol–gel route. The formed hydrogel which was aged for proper growth and orientation at room temperature, was then dried at a low temperature to minimize agglomeration. The sol–gel derived precursor powder was properly characterized through determination of surfa...

in this work, the strontium-doped lanthanum manganite- a ceramic material- used as cathode in solid oxide fuel cells. an impression of grinding time on the structural and thermal properties of sr-doped lamno3 system with la1-xsrxmno3 (x=0.2) stoichiometric ratio was investigated. the nano crystallite lsm powder with cubic structure was prepared by varying the milling time of planetary monomill ...