fiber post (GFP) treated or not with phosphoric acid, silane coupling agent, and unfilled resin. GFPs were etched or not with 37% phosphoric acid and different surface coating applied: silane coupling agent, unfilled resin, or both. Composite resin blocks were built around a 4-mm height on the GFP. Unfilled resin (20 s) and composite resin (40 s) were light activated by a light-emitting diode u...

graph 5100, Micromeritics) and the specific surface area was measured by nitrogen adsorption, the BET-method (ASAP 2000, Micromeritics). The particle size distribution (PSD), a narrow or broad distribution, was determined by using the equation: PSD slope=[75% (ESD)-25% (ESD)]/2.APS, where ESD means equivalent spherical diameter and APS means average particle size. Oil absorption, packing index,...

Fe-based amorphous/nanocrystalline coatings were prepared on the AISI 321 steel substrate by the high-velocity oxygen-fuel (HVOF) thermal spraying technology. The effect of selected parameters (oxygen flow, kerosene flow and spray distance) on the cavitation erosion resistance (denoted as Rc) of the coating were investigated by using the Taguchi method. Statistical tools such as design of exper...

The efficacy of an edible chitosan coating (CHI; 4 mg/mL) and Origanum vulgare L. essential oil (OVEO; 1.25 μL/mL) for maintaining the quality of cherry tomato fruit during storage at room (25°C; 12 days) and cold (12°C; 24 days) temperatures was assessed. CHI and OVEO in combination showed in vitro fungicidal effects against R. stolonifer and Aspergillus niger. CHI-OVEO coating reduced the inc...

The double-chained, zwitterionic phospholipid 1,2-dilauroyl-sn-phosphatidylcholine (DLPC, C12) was investigated for its use as a wall coating for the prevention of protein adsorption in capillary electrophoresis. DLPC forms a semipermanent coating at the capillary wall, which allows excess phospholipid to be removed from the capillary prior to electrophoretic separation. A DLPC-coated capillary...

Hydrophobic coatings, such as octadecyltrichlorosilane or n-alkyl monolayers, enhance the slippage of liquids on solid walls. For a given alkyl chain length, the main structural parameter for homogeneous coatings is the tilt angle between coating molecules and the surface normal. In this paper, ab initio calculations are used to calculate the equilibrium configuration of coating molecules, show...

Specialty optical fibers operating in harsh aerospace environments are typically exposed to high temperatures and elevated humidity. This calls for better performing protective coatings. Recently developed sol-gel derived inorganicorganic hybrid materials called hybrid glass offered improved protective performance as compared to standard dual polymer coated fibers [1]. In this paper we examine ...

We present a simple two-step method to fabricate dual-scale superhydrophobic surfaces by using replica molding of poly(dimethylsiloxane) (PDMS) micropillars, followed by deposition of a thin, hard coating layer of a SiO(x)-incorporated diamond-like carbon (DLC). The resulting surface consists of microscale PDMS pillars covered by nanoscale wrinkles that are induced by residual compressive stres...

in the present study, the effects of growth defects and chromium content loss on the degradation of corrosion andpassivation of cathodic arc evaporation (cae-pvd) of stainless steel coating were investigated in 2 m sulphuricacid solution. eds analysis indicated that the micro-particles were obtained during the coating growth. in addition,it was detected that the growth defects had poor adhesion...

The phosphorus barrier layers at the doping procedure of silicon wafers were fabricated using a spin-coating method with a mixture of silica-sol and tetramethylammonium hydroxide, which can be formed at the rear surface prior to the front phosphorus spin-on-demand (SOD) diffusion and directly annealed simultaneously with the front phosphorus layer. The optimization of coating thickness was obta...