نتایج جستجو برای: microstrip line
تعداد نتایج: 416269 فیلتر نتایج به سال:
This paper investigates the use of the guard traces to improve the Time-Domain Transmission (TDT) waveform and eye diagram for a flat spiral delay line. Two types of guard trace are adopted to implement and analysis in microstrip line and stripline structures. One is Two Grounded Vias type Guard Trace (TGVGT) and the other is Open-Stub type Guard Trace (OSGT). The timedomain analysis results by...
یکی از اهداف مهم در طراحی تقویت کننده های rf حداکثر نمودن بازدهی توان افزوده می باشد، که منجر به حذف خنک کننده های بزرگ و افزایش طول عمر باتری می گردد.استفاده از تقویت کننده کلاسf به منظور رسیدن به بازدهی توان افزوده بالا اخیراً مورد توجه قرار گرفته است.در این کلاس کاری با استفاده از فیلترهایی در خروجی و کنترل هارمونیک ها، شکل موج جریان و ولتاژ کلکتور(درین) را به نحو مناسبی تغییر داده با عث افزی...
This paper presents a simple broadband proximitycoupled microstrip patch antenna. A circular patch is used as the main radiator, and an H-shaped shot is cut in the ground plane below the feed line. A stepped-width microstrip line is used to feed the patch through proximity coupling. By using a single patch, the prototype antenna achieves an impedance bandwidth of 26%. Low cross-polar levels bel...
In this paper, a printed hexagonal wide slot antenna, fed by a microstrip line with fork like tuning stub for bandwidth enhancement is proposed and experimentally investigated. The impedance, radiation and gain characteristics of this antenna are studied. Simulation and experimental results indicate that a 1.5:1 VSWR bandwidth, of about 1 GHz and 2:1 VSWR bandwidth of 1.34 GHz is achieved at op...
This paper presents a realization of composite right/left handed transmission lines using coupled microstrip lines. This structure exploits the advantages of the microstrip lines, while increases the coupling by a floating conductor at the ground plane. The performance of this composite right/left-handed line is demonstrated by both simulated and measured results, and they show good agreement. ...
In this paper, we propose a novel microstrip antenna for operating over a three frequency bands, covering the 2.4/5.2/5.8 GHz WLAN and 2.5/3.5/5.5GHz WiMAX bands. The proposed antenna occupies an area of 30 mm 40mm, when printed on FR4 substrate (εr=4.4, h=0.8mm). The antenna comprises of a triangular patch section, L-shaped parasitic elements on the edges of triangular patch and a 50Ω micros...
In this article, a wideband transition from microstrip transmission line to spoof surface plasmon polariton (SSPP) is reported. The proposed realized achieve better performance starting low frequencies up 40 GHz. shape of the unit cell taken in such manner that momentum, impedance, and polarization can be matched with SSPP line. wide operating band achieved by perturbing only cell. Extra care c...
In this paper, we have simulated a single-pin-shorted microstrip line fed three-dielectric-layer (with different permittivity and thickness) rectangular patch microstrip antenna for all those communication systems whose limited antenna size is premium. Low permittivity hard foam has been used as one substrate to achieve wide bandwidth. The simulation of this proposed antenna has been performed ...
A new microstrip ultra-wideband (UWB) bandpass filter (BPF) with triple-notched bands is presented in this paper. The circuit topology and its corresponding electrical parameters of the initial microstrip UWB BPF are desired by a variation of genetic algorithm (VGA). Then, triple-notched bands inside the UWB passband are implemented by coupling a square ring short stub loaded resonator (SRSSLR)...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید