The influence of different additives: high density polyethylene (HDPE), low density polyethylene (LDPE) and TiO2 nanoparticles on the polyethylene terephthalate (PET)–rubber nanocomposite interface was investigated. The composites obtained by compression moulding from tire rubber and PET bottles’ waste were partially heterogeneous and partially compatible, as confirmed by the FTIRmeasurements. ...

BACKGROUND High Density Polyethylene (HDPE) is one of the most often used polymers in biomedical applications. The limitations of HDPE are its visco-elastic behavior, low modulus and poor bioactivity. To improve HDPE properties, HA nanoparticles can be added to form polymer composite that can be used as alternatives to metals for bone substitutes and orthopaedic implant applications. METHOD I...

Wood–plastic composites (WPCs) increase the range of applications materials by creating new material solutions. As part this research, PLA (polylactic acid)- and HDPE (high-density polyethylene)-based were manufactured. Softwood sawdust or conifer bark with different sizes (large small) used as filler. In selected cases, addition 3% additives, such calcium oxide in case polyethylene-graft-malei...

Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation ...

Producing both hydrogen and high-value carbon nanotubes (CNTs) derived from waste plastics is reported here using a pyrolysis-reforming technology comprising a two-stage reaction system, in the presence of steam and a Ni-Mn-Al catalyst. The waste plastics consisted of plastics from a motor oil container (MOC), commercial waste high density polyethylene (HDPE) and regranulated HDPE waste contain...

Climate change occasioned by the accumulation of greenhouse gases (GHGs) is now widely accepted as an issue which mankind needs to address. The starting point is necessarily the determination of all the sources of emissions during the life-cycles of the studied components. Post-calculation, the results ought to be presented to decision-makers in a clear manner so as to provide the basis on whic...

Apple growers face new challenges to produce organic apples and now many cover orchards with high-density polyethylene (HDPE) nets to exclude insects, rather than spraying insecticides. However, rainwater- associated wetness favours the development of apple scabs, Venturia inaequalis, whose lesions accumulate on the leaves and fruit causing unsightly spots. Treating the nets with a superhydroph...

A low-pressure plasma surface treatment of polymeric powders was carried out in a circulating fluidized bed (CFB) reactor (10 mm-I.D. × 800 mm-high) with CF4 glow discharge. The effects of solid circulation rate, treatment time and radio frequency (rf) power of plasma on fluorination of high-density polyethylene (HDPE) powders have been determined. X-ray photoelectron spectroscopy (XPS) and the...

The efficacy of untreated and alphacypermethrin-treated high density polyethylene (HDPE) mesh against Culicoides biting midges (Diptera: Ceratopogonidae) was determined using Onderstepoort downdraught black light traps and a contact bioassay. Three traps were operated overnight in four replicates of a 3×3 randomised Latin square design near horses under South African field conditions. Both the ...

This article aims to study recycled biochar (R-BCH) improvements on the high-density polyethylene (HDPE) matrix properties. A series of composites was developed with a different loading varying from 0 10 wt.% R-BCH, using twin-screw extruder followed by compression molding. The results were showed that addition 3-10% R-BCH in pure HDPE led an increase tensile strength, modulus elasticity, and d...