The flow field development through a simplified shock absorber orifice geometry is investigated using single phase Large Eddy Simulation. Hydraulic oil used as the working fluid with constant inlet velocity and an open top boundary to allow study focus on free shear layer in vicinity of main orifice. validated standard mixing dynamics. impact shape discussed regards initial growth, potential ap...

Flow through circular orifices with thickness-to-diameter ratios varying from 0.015 to 1.2 is studied experimentally and numerically with kinetic and continuum approaches. Helium and nitrogen gases are used in the range of Reynolds numbers from 0.02 to over 700. Good agreement between experimental and numerical results is observed for mass flow and thrust corrected for the experimental facility...

OBJECTIVES Proper valve selection is critical to ensure appropriate valve replacement for patients, because implantation of a small valve might place the patient at risk for persistent gradients. Labeled valve size is not the same as millimeter measure of prosthetic valve diameters or the annulus into which it will fit. Studies that use the labeled valve size in lieu of actual measured diameter...

The new geometrical design of stand-pipe air distributor for the combustion of the municipal solid waste was presented. The new design of the air distributors enables penetration of incombustible and unburnt carbon through opening between the air distributors, thus providing easy maintenance work. The fluidized bed experimental rig was constructed using Perspex column in which air was supplied ...

The flow field generated by a zero-net mass-flux (ZNMF) actuator is investigated via both numerical simulations and experiments to augment the current understanding of the flow physics of the orifice. The results aid in improving the accuracy of low dimensional lumped element ZNMF models suitable for design. Dimensional analysis yields a number of key parameters that govern the characteristics ...