The helix geometry model of 3D braided composites has been presented, which truly reflects the braided manner and coincides with the actual configuration of the braided composites. The longitudinal tensile stress-strain relationships and the strength of 3D braided composites under the tension loading have been predicted by a finite multiphase element method (FMEM) based on the helix geometry mo...

In the present work, fabrication and evaluation of low density glass – epoxy (LDGE) composites suitable for absorbing minimum 80 per cent of incident microwave energy in 8 GHz to 12 GHz (X-band) is reported. LDGE composites having different densities were fabricated using a novel method of partially replacing conventional S-glass fabric with low density glass (LDG) layers as the reinforcement m...

this research investigates the effect of the post-cure time on the residual stresses in laminated composites. laminated composites were made of t300 carbon fibers and epoxy resin. the post-cure process was carried out at the constant temperature of 120 °c for 6 and 12 hours for two specimens. the slitting method was employed to determine through-thickness residual stress distribution of the com...

in this research, a novel method to decrease micro-residual stresses of fibrous composites by adding carbon nanotubes (cnts) is proposed in detail. the negative coefficient of thermal expansion and the high young’s modulus of cnts can be utilized to counterbalance the process induced residual stresses in composites. to this end, first, the effects of adding cnts to the matrix of fibrous composi...

Carbon fiber-reinforced multi-layered pyrocarbon-silicon carbide matrix (C/C-SiC) composites are widely used in aerospace structures. The complicated spatial architecture and material heterogeneity of C/C-SiC composites constitute the challenge for tailoring their properties. Thus, discovering the intrinsic relations between the properties and the microstructures and sequentially optimizing the...

Zeolite Beta/MCM-41 composites have been prepared with various crystallinities of zeolite Beta through a twostep crystallization process involving the combination of low crystallinity zeolite Beta synthesis gel with cetyltrimethylammonium bromide surfactant solution. The composites are characterized by XRD, SEM, Si and Al MAS NMR, N2 adsorption, NH3-TPD and catalytic cracking. The experimental ...

In this investigation, studies are carried out on the mechanical properties of hybrid polymer composites. Hybrid composites can reach a better combination of both artificial and natural fibre properties. Different weight percentages of jute fibres were hybridised with coconut sheath to produce the composites through compression moulding. Composites were produced using untreated and treated fibr...

Magnetic inducing hyperthermia (MIH) is gaining great popularity due to its good targeted therapy and less side effects. Magnetic agents play a crucial role in this technique. As novel candidates, recently, carbon nanotubes/iron oxide nanoparticles composites have demonstrated great potential in MIH by combining the unique characteristics of carbon nanotubes with the excellent magnetic properti...

The development of environmental friendly engineering material has received top priority recently. Glass fiber (GF) reinforced polypropylene (PP) composites is one of the most widely used materials in the automotive industry due to its favourable properties. However, the presence of GF has become a major issue in the recycling of GF/PP composites. Considerable efforts have been devoted to find ...

Composite faces built by eyewitnesses commonly are poor likenesses of the target face. When there are multiple witnesses, however, an opportunity exists to morph the composites. Morphs were rated as more similar to the target face than were the mean ratings of the individual composites. However, as hypothesized, the morph also came to resemble non-target faces more than the individual composite...