This case illustrates the potential for systemic cobalt toxicity in non-metal-on-metal bearings and its potentially devastating consequences. We present a 71-year-old male with grinding sensations in his right hip following ceramic-on-ceramic total hip arthroplasty (THA). After diagnosing a fractured ceramic liner, the hip prosthesis was revised into a metal-on-polyethylene bearing. At one year...

Femtosecond laser has been proposed as a method for conditioning zirconia surfaces to boost bond strength. However, metallic or ceramic bracket bonding to femtosecond laser-treated zirconia surfaces has not been tested. This study compared the effects of four conditioning techniques, including femtosecond laser irradiation, on shear bond strength (SBS) of metallic and ceramic brackets to zircon...

The purpose of this study was to evaluate the bond strength of metallic orthodontic brackets to feldspathic ceramic with different etching times, bonding materials and with or without silane application. Cylinders of feldspathic ceramic were etched with 10% hydrofluoric acid for 20 or 60 s. For each etching time, half of the cylinders received two layers of silane. Metallic brackets were bonded...

The type of bearing material that should be used in revision surgery after the failure of ceramic-on-ceramic total hip arthroplasty (THA) remains controversial. In the case of ceramic fracture, the residual ceramic particles can cause consequent metallosis when metal implants are used for revision THA. On the other hand, in the case of THA failure without ceramic fracture, revision THA with a m...

Ceramic/metal interfaces occur in a great number of important applications, such as ceramic/metal composites, microelectronics packaging, ceramic/metal seals, and so forth. Understanding the formation and evolution of such interfaces is therefore essential for the better design and optimization of these technologies. In this thesis, a methodology for the study of the thermochemical interactions...

conclusions fuji plus cement exhibited better sealing ability in closed and open margins compared to g-cem and fleck cements. when using g-cem and fleck cements for full metal ceramic restorations, clinicians should try to minimize marginal gaps in order to reduce restoration failure. in situations where there are doubts about perfect marginal adaptation, the use of fuji plus cement may be help...

STATEMENT OF PROBLEM Fabricating a feldspathic porcelain margin on a metal-ceramic restoration with a clinically acceptable marginal fit has proven to be a technique-sensitive procedure. Pressable ceramics are advocated to solve this problem. PURPOSE The purpose of this in vitro study was to compare the marginal adaptation of a pressable ceramic system when used with both all-ceramic and meta...

Over the past 35 years, multiple types of all-ceramic materials have been introduced as an ideal alternative for metal-fused to ceramic. This review covers state-of-the-art development of all-ceramic systems in terms of history, material composition, fabrication technologies, and structural and strength properties. These materials are proved to be ideal in terms of mechanical properties and bio...

The purpose of this study was to evaluate the metal-ceramic bond strength (MCBS) of 6 metal-ceramic pairs (2 Ni-Cr alloys and 1 Pd-Ag alloy with 2 dental ceramics) and correlate the MCBS values with the differences between the coefficients of linear thermal expansion (CTEs) of the metals and ceramics. Verabond (VB) Ni-Cr-Be alloy, Verabond II (VB2), Ni-Cr alloy, Pors-on 4 (P), Pd-Ag alloy, and ...

PURPOSE OF THE STUDY Total hip arthroplasty increases the use of alternate bearings to prevent polyethylene wear as the number of younger and more active patients has drastically risen. We carried out a prospective randomized study, to assess and compare clinical results and radiological changes, serum-cobalt- and serum-aluminium-levels when metal-on-metal and ceramic-on-ceramic bearings are ap...