Liquid foams were recognized early to be porous materials, as liquid flowed between the gas bubbles. Drainage theories have been established, and foam permeability has been modeled from the microscopic description of the equivalent pores geometry, emphasizing similarities with their solid counterparts. But to what extent can the theoretical work devoted to the permeability of solid porous mater...

Magnesium alloys have considerably lower density than the aluminum alloy matrices that are typically used in syntactic foams, allowing for greater specific energy absorption. Despite the potential advantages, few studies have reported the properties of magnesium alloy matrix syntactic foams. In this work, Al₂O₃ hollow particles of three different size ranges, 0.106-0.212 mm, 0.212-0.425 mm, and...

Hybrid Ni/Al foams were fabricated by depositing electroless Ni-P (EN) coatings on open-cell Al foam substrate to obtain enhanced mechanical properties. The microstructure, chemical components and phases of the hybrid foams were observed and analyzed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The mechanical proper...

Rigid polyurethane foams were prepared from the liquefied wood polyols, which was obtained by the liquefaction of southern pine wood in the presence of polyhydric alcohols with sulfuric acid catalyst by using microwave-assistant as an energy source. The properties of liquefied biomass-based polyols and the rigid polyurethane foams were investigated. The results indicated that the foams exhibite...

Few foam systems stabilized by solid particles have been reported, and usually the particles have been used in combination with surfactants. We report how foams can be stabilized solely with a new class of anisotropic particles, hydrophobic polymer microrods of diameter less than 1 mum and length of a few tens of micrometers. The obtained foams were extraordinary stable, retaining a constant vo...

Natural fibre reinforced polylactic acid (PLA) foams, as potential green replacements for petroleum-based polymer foams, were investigated. Highly porous (ε > 95%) microcellular PLA foams were manufactured by supercritical CO2 assisted extrusion process. To overcome the inherent low melt strength of PLA, epoxyfunctionalized chain extender was applied, while talc was added to improve its crystal...

We study diamagnetically levitated foams with widely different liquid fractions. Due to the levitation, drainage is effectively suppressed and the dynamics is driven by the coarsening of the foam bubbles. For dry foams, the bubble size is found to increases as the square root of foam age, as expected from a generalized von Neumann law. At higher liquid content the behavior changes to that of Os...

An easy method that combined gel casting and physical foaming was used to fabricate modified carbon foams. The design of carbon foams from sucrose/polyacrylamide hydrogel is a new concept for controlling the microstructure and improving the compressive properties of carbon foams. This article provides the micrographs obtained from optical and scanning electron microscope for foaming solution an...