Potassium chloride (KCl) is a highly water soluble substance which is usually used to prevent hypokalemia. Oil in water disperse phase encapsulation method was used to prepare KCl loaded microcapsules using beeswax and carnauba wax as a hydrophobic matrix. The morphology and characteristics of KCl loaded microspheres were studied using scanning electron microscopy (SEM), photon correlation spec...

High speed and low cost configuration loading methods for a coarse grain multicontext reconfigurable device DRP(Dynamically Reconfigurable Processor) are proposed and implemented. In these methods, the configuration data is compressed on the host computer before loading, and decoded at the time of loading by circuits implemented on a part of logics. Unlike conventional reconfigurable device, th...

in this study, a researching program is conducted by cyclic triaxial test to determine the post-cyclic behavior of bushehr carbonate sand retrieved from the north of the persian gulf, under anisotropic consolidation at 200 kpa confining pressure. the article compares the post-cyclic monotonic strength and excess pore water pressures generated after the test with the pre-cyclic monotonic results...

The appropriateness of normalizing data, as one method to reduce the effects of a covariate on a dependent variable, should be evaluated. Using ratio, 0.67-nonlinear, and fitted normalizations, the aim of this study was to investigate the relationship between ground reaction force variables and body mass (BM). Ground reaction forces were recorded for 40 female subjects running at 3.7 +/- 0.18 m...

To counter environmental threats to the water resources polluted by NH, which is common in wastewaters and agricultural runoff, adsorption using mesoporous functional materials represents a promising alternative to existing treatment methods. In this study, adsorption of NH ions from aqueous solutions was investigated on arene- and propylsulfonic acid functionalized SBA-15 mesoporous silica mat...

OBJECTIVES This study was performed to evaluate patterns of failure time after insertion, failure rate according to loading time after insertion, and the patterns of failure after loading. MATERIALS AND METHODS A total of 331 mini-implants were classified into the non-failure group (NFG) and failure group (FG), which was divided into failed group before loading (FGB) and failed group after lo...

one of the methods for the improvement of soil against the tensile stresses is using the artificial supplements in soil such as metal belts or nets, polymer materials and natural fibers. technically this method is called the reinforced of soil.  when a pavement is located on soft soil, great deformations can occur as a result of the crossing of traffic load in superstructure layers of the body....

In this paper the effects of circular and elliptical cutout on the buckling behavior of a sixteen ply quasi-isotropic graphite/epoxy symmetrically laminated rectangular composite plate [0°/+45°/45°/90°]2s, subjected to various linearly varying in-plane compressive loads, numerically. Further, this paper addresses the effects of size of elliptical cutout, orientation of elliptical cutout, plate ...

experimental study of the cyclic behavior of unsaturated materials is more complex than that of the saturated materials due to the required equipment, experience and time. furthering investigations in the field of unsaturated materials is necessary to better understand its complexity and sensitivity of unsaturated cyclic parameters to different determinants such as suction path, stress path, lo...

the esterification of free fatty acids (ffa) with methanol is studied using sulfonated porous carbon (spc) as catalyst. in compare to the amorphous sugar catalyst and protonated nafion, the proposed catalyst shows stability and high efficient performance in biodiesel production. the highest initial rate of oleic acid conversion is obtained at catalyst loading of 1 mmol h+ and mole ratio of meoh...