The crosslinked chitosans synthesized by the homogeneous reaction of chitosan in aqueous acetic acid solution with epichlorohydrin were used to investigate the adsorptions of three metals of Cu(II), Zn(II), and Pb(II) ions in an aqueous solution. The crosslinked chitosan characterized by 13CNMR, SEM, and elemental analysis, and the effects of pH and anion on the adsorption capacity were carried...

in this study adsorption of 1-chloro-4-nitrobenzene (cnb) from aqueous solutions onto multi-walled carbon nanotubes (mwcnts) was surveyed. the effect of some key parameters such as ph (2-10), carbon nanotubes dosage (0.02-0.1 mg/250ml), cnb concentration (2- 16 mg/l), and temperature (20,30,40,50°c) were investigated. the results showed that, the variation of initial ph and cnb concentration ex...

Present study dealt the removal of Cr(VI) in a tannery industry wastewater using rice husk silica powder as an adsorbent.The experimental investigations have been carried out by using rice husk silica powder for different adsorption dosage, different contact time and different pH against the initial Cr(VI) concentration of 292 mg/L. The maximum percentage removal of Cr(VI) in a tannery industri...

This research determined the adsorption performance of Florisil® impregnated with trihexyl(tetradecyl)phosphonium chloride (Cyphos IL-101) in the process of Cs+ removal from aqueous solutions. The obtained Florisil® impregnated with the studied ionic liquid was characterized through energy dispersive X-ray analysis and Fourier transform infrared spectroscopy in order to verify that the impregna...

The potential of spherical lignin beads as an adsorbent to take up Llysine from aqueous solution was investigated. The kinetic data were estimated by the pseudo-first-order and pseudo-second-order models. The mechanism of adsorption was also studied using the Boyd model and Webber’s intraparticle diffusion model. The equilibrium data were modeled by the Langmuir, Freundlich, and Dubinin-Radushk...

This study was focused on nettle ash as an alternative adsorbent for the removal of nickel (II) and cadmium (II) from wastewater. Batch experiments were conducted to determine the factors affecting adsorption of nickel (II) and cadmium (II). The adsorption process is affected by various parameters such as contact time, solution pH and adsorbent dose. The optimum pH required for maximum adsorpti...

This paper describes the performance of Granular Activated Carbon (GAC) to adsorb and separate glucose and maltose solutes from the industrial effluents by adsorption process. In this study, the capability of Granular Activated Carbon (GAC) to adsorb glucose and maltose were experimentally examined. Commercial GAC (mesh 12-20), supplied by Sigma Aldrich company in...

Adsorption of p-Nitrophenol by three different activated carbons (F100, S.E.I. and B.D.H.) was carried out at 301 K and at controlled pH conditions. Two different adsorption models (Langmuir model and Freundlich model) were studied and compared. The adsorption capacity of the carbons depends on the Point of Zero Charge (PZC) and surface area of the carbons. Adsorption of the solute at higher pH...

Nitrate sorption potentials of three surface soils (soils-1-3) were evaluated under different solute concentrations, i.e. 1-100 mg L(-1). Batch and diffusion-cell adsorption experiments were conducted to delineate the diffusion property and maximum specific nitrate adsorption capacity (MSNAC) of the soils. Ho's pseudo-second order model well fitted the batch adsorption kinetics data (R(2)>0.99)...

A semimechanistic multi-reaction kinetic model was developed to describe the enzymatic hydrolysis of a lignocellulosic biomass, creeping wild ryegrass (CWR; Leymus triticoides). This model incorporated one homogeneous reaction of cellobiose-to-glucose and two heterogeneous reactions of cellulose-to-cellobiose and cellulose-to-glucose. Adsorption of cellulase onto pretreated CWR during enzymatic...