This paper is concerned with the statistical model development issues, necessary for rapid estimation of the rotor sizing for single main rotor helicopters at the preliminary design stage. However, Central Composite Design (CCD) method, simulation-based data collection, linear regression analysis, mathematical modelsdevelopmentand validations through the analysis of variance (ANOVA) were perfor...

Abstract: This paper presents a new method for observing the rotor temperature of high-power squirrel cage induction machines in measurable variables. The method is based on the fact that the rotor resistance depends on the actual rotor temperature. The main problem is to separate the changes in the rotor resistance due to temperature and skin effect. By comparing the input impedance with a kno...

H∞ controller for active magnetic bearings (AMBs) with flexible rotor system was designed in this paper. The motion equations of AMBs and flexible rotor system are built based on finite element methods (FEM). Weighting function matrices of H∞ controller for AMBs are studied for both the sensitivity and the complementary sensitivity of H∞ control theory. The simulation shows that the H∞ control ...

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

There is unbalanced magnetic pull between the rotor and stator of the cage induction motor when the rotor is not concentric with the stator. These forces depend on the position and motion of the center point of the rotor. In this paper, the linearity of the forces in proportion to the rotor eccentricity is studied numerically using time-stepping finite element analysis. The results show that us...

We prove a shape theorem for rotor-router aggregation on the comb, for a specific initial rotor configuration and clockwise rotor sequence for all vertices. Furthermore, as an application of rotor-router walks, we describe the harmonic measure of the rotor-router aggregate and related shapes, which is useful in the study of other growth models on the comb. We also identify the shape for which t...

The aim of this paper is to study the application of model predictive controller for improving stability of rotor and rotor vibration. Rotor vibrations in electrical machines are dampen out by model predictive control algorithm. The controlled system is the one dimensional Jeffcott-rotor. Model predictive control algorithm was designed, and the simulation results were obtained by Mat lab softwa...

Effective condition monitoring of induction motors requires knowledge of the number of rotor slots and the rotor speed. These were primarily obtained in the literature by multiple measurements and using design knowledge of the motor under test. Furthermore, the earlier studies have mainly concentrated on stator current analysis. This paper investigates the use of the stator current, axial flux,...

Hover performance of a twin-rotor test model in terms of rotor overlap sweep, blade collective pitch, and blade tip speedwasexaminedexperimentally.The experimental setup consisted of two three-bladed rotors (tandem rotor configuration) with a diameter of1,220 mm and constant chord of 38 mm, giving a blade aspect ratio of 16.05. The blades were of a rectangular planform with NACA 0012 cross-sect...

The model for the stator-rotor interaction is discussed in the sections The stator-rotor interaction and The rotor switching dynamics of the main text. The model is based on the model Oster and Blair and coworkers [1, 2] and Meacci and Tu [3], but extended to include the conformational transitions of the rotor protein complex. Here, we discuss aspects of the model that are not discussed in the ...