Polyvinylidene fluoride/polyvinylpyrrolidone (PVDF/PVP) hollow fiber membranes were fabricated by dry-jet wet-spinning process. The correlated effects of the air gap length and PVP concentration ((1) the air gap length effect at the low and high PVP concentration in the dope solutions, as well as (2) the effect of the PVP concentration at the same air gap length) on the cross-section structure ...

We demonstrate an in-line polarization controller based on a hollow optical fiber filled with a nematic liquid crystal by fabricating thin-film electrodes on the cladding of a fiber. The polarization controller consists of three control sections with fixed optic axes, which operate as phase retarders. The phase retardation in each section is controlled by the magnitude of the applied electric f...

short): Hollow-core Optical Fiber Gas LASer (HOFGLAS) have been created, and explored in pulsed mode with C2H2 and HCN gas inside the hollow core of a kagome structured photonic crystal fiber, and nearideal efficiencies were realized for wavelengths near 1.5 μm (pump, 1 ns-pulses) and 3 μm (lasing). Improved fiber loss is realized near 3 μm to <1 dB/m. In addition, a pulsed CO2 waveguide (silve...

We aimed to investigate the relationship between membrane material and the development of membrane fouling in a membrane bioreactor (MBR) using membranes with different pore sizes and hydrophilicities. Batch filtration tests were performed using submerged single hollow fiber membrane ultrafiltration (UF) modules with different polymeric membrane materials including cellulose acetate (CA), polye...

In this paper, a system for efficient removal of carbon dioxide by hollow fiber membranes is proposed. The system is compact, and it is very useful for application in the offshore energy industries. In particular, it is used to removing CO2 from the exhaust of power generation facilities on offshore platforms.The proposed dual membrane contactor contains two types of membranes (polypropylene me...

A multichannel mixed-conducting hollow fiber (MMCHF) membrane, 0.5 wt % Nb2O5-doped SrCo0.8 Fe0.2O3-d (SCFNb), has been successfully prepared by phase inversion and sintering technique. The crystalline structure, morphology, sintering behavior, breaking load, and oxygen permeability of the MMCHF membrane were studied systematically. The MMCHF membrane with porous-dense asymmetrical microstructu...

On the basis of the affinity of alumina towards hydroxyl functional groups, a solid phase microextraction (SPME) fiber was constructed using alumina powder and poly(vinyl chloride) (PVC). Different compositions were tested and alumina:PVC (97:3) was selected as an optimun composition. A piece of silver wire was used as fiber support. The fiber producing was simple and could be completed in a fe...