Lead zirconate titanate (PZT) nanopowders with spherical-shaped morphology, perovskite structure and an average size of 20 nm were successfully synthesized. The prepared PZT nanopowders were characterized by differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy dispersive X-ray (EDS) and Transmission electron microscopy (TEM) technique. Single-...

Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...

In order to investigate the high temperature rupture property of deposited metal of SUPER304H steel, the high temperature tensile test was carried out, and the microstructure transformation of deposited metal of SUPER304H steel under high temperature persistent stress were studied. Most of the solidification subgrain boundaries dissolve. The effect of the high temperature enduring on the micros...

effect of temperature on hydrodynamics of bubbling gas-solid fluidized beds was investigated.  experiments were carried out in the range of 25-600 ºc and different superficial gas velocities in the range of 0.17-0.78 m/s with sand particles. time-position trajectory of particles was obtained by radioactive particle tracking technique. these data were used for determination of mean velocities of...

in the present work, high temperature tensile properties of medium density polyethylene (mdpe) and its nanocomposites are investigated. for this purpose mdpe reinforced with different weight percentages of nano-sized calcium (2, 5, 10) are produced by compression moulding method. tensile tests have been carried out at different temperatures, i.e. 30, 60, 90c using thermomechanical analysis (tm...

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...

This study reports the simulation of a photocatalytic system process and the photocatalytic property of self-cleaning asphalt concrete (SCAC) with four typical asphalt mixtures. A photocatalytic system was simulated based on the pollutant concentration data, which were collected on three types of city roads. Two photocatalytic indexes were proposed to evaluate the photocatalytic property of sel...

The thermal dynamical property of ideal gas on the noncommutative geometry in the coherent state formalism is investigated. We first evaluate the statistical interparticle potential and see that there are residual “attraction potential” between boson and residual “repulsion potential” between fermion in the high temperature limit. The characters could be traced to the fact that, the particle wi...